EVBatteryRecycling
Refining stagePassenger · LMO Pouch

Nissan Leaf ZE1 battery recycling in Reno, Nevada

Reno, Nevada does not take whole packs. It receives black mass made from Nissan Leaf ZE1 modules that failed grading, and turns it into battery-grade salts.

Pack value at 80% SOH

1,167 USD

Hybrid Split

Second-life share

47%

At 80% SOH

Site capacity

45,000 TPA

Hydrometallurgical Refinery

Cities served

7

From Reno, Nevada

Nissan Leaf ZE1 pack data
Route

Where a Nissan Leaf ZE1 pack goes from Reno, Nevada

  1. 1

    Collected via Dallas, Texas

    Whole packs enter the network at Dallas — Texas Reverse Logistics Yard, 2,190 km away, where they are weighed and de-energised.

  2. 2

    Graded at Fremont, California

    Modules travel 291 km to Fremont — California Diagnostics Works for capacity, resistance and impedance testing across all 24 modules.

  3. 3

    Second life at Gothenburg, Sweden

    At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,309 km). Limited — accelerated manganese dissolution caps second-life warranty terms at 36 months.

  4. 4

    Refining at Reno, Nevada

    Black mass from failed modules is leached and refined here into battery-grade nickel, cobalt and lithium salts.

StageFacilityDistance
Nearest intake yardDallas — Texas Reverse Logistics Yard2,190 km
Nearest grading benchFremont — California Diagnostics Works291 km
Nearest second-life worksGothenburg — Nordic Second-Life Campus8,309 km
Straight-line distances from Reno, Nevada to the next facilities in the network.

Faster option

The closest direct intake sites for Nissan Leaf ZE1 packs are Dallas, Texas (2,190 km) and Monterrey, Nuevo Leon (2,378 km).
The pack

Inside the Nissan Leaf ZE1 battery

The Nissan Leaf ZE1 (2018) carries a 40 kWh LMO / LMO-NMC Pouch pack with 24 modules at 350 V, weighing roughly 324 kg. Legacy manganese-rich pouch packs common in early two- and three-wheeler fleets across South Asia.

Service yearSOHGradeValue
Year 295.4%A — BESS readyUSD 1,450
Year 491.1%A — BESS readyUSD 1,394
Year 686.8%A — BESS readyUSD 1,339
Year 882.5%B — Second lifeUSD 1,223
Year 1078.2%B — Second lifeUSD 1,132
Modelled state of health and residual value for the Nissan Leaf ZE1 pack.
LMO Pouch

What the chemistry means here

01

How it ages

LMO's weak point is manganese dissolution, which speeds up at elevated temperature and damages the anode. Packs that lived in hot climates without active cooling typically fade faster.

02

Thermal behaviour

Manganese spinel is more thermally stable than nickel-rich cathodes, but blended LMO-NMC pouch cells still vent flammable gas when abused, and older packs may have weaker protection electronics.

Handling LMO Pouch

Many LMO packs come from early two- and three-wheelers and informal service channels. Expect missing documentation, check for prior repair and quarantine anything with swelling or corrosion.
Passenger handling

Collecting a Nissan Leaf ZE1 pack

40 kWh, 24 modules, about 324 kg — this is how the Reno, Nevada team plans the job.

Removing a passenger EV battery pack for recycling
01

Removal

Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.

02

Packaging

One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.

03

Consolidation

Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.

Before the truck arrives

  • Pull the service disconnect and record pack voltage
  • Drain or cap coolant lines before lifting
  • Photograph the pack casing and any impact damage
  • Keep the VIN and pack serial together on the manifest

Reno, Nevada site notes

  • Only black mass and cell or cathode scrap are accepted at this site.
  • Bulk bags must be sealed, labelled and accompanied by chemistry declarations.
  • Deliveries are booked into fixed dock windows at the industrial centre.
  • Settlement follows sampling and assay at intake, with results shared with the consignor.
Recovery

What this pack yields

lithium

2.82 kg

nickel

6.02 kg

cobalt

0.85 kg

manganese

17.59 kg

copper

11.1 kg

aluminium

12.41 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in United States

EPA universal waste rules, DOT hazardous materials regulations and state programmes

Regulator: EPA, DOT PHMSA and state environmental agencies

The refinery is permitted through the Nevada Division of Environmental Protection, with conditions on air emissions, water use and hazardous materials. Inbound feed is managed under the applicable US EPA hazardous or universal waste rules, and shipments follow US DOT hazardous materials regulations.

FAQ

Nissan Leaf ZE1 in Reno, Nevada: common questions

Can I drop off a Nissan Leaf ZE1 battery at Reno, Nevada?

Reno, Nevada is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Dallas, Texas, 2,190 km away.

What happens to Nissan Leaf ZE1 modules after Reno, Nevada?

Collected via Dallas, Texas, then Graded at Fremont, California, then Second life at Gothenburg, Sweden, then Refining at Reno, Nevada. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.

How should a Nissan Leaf ZE1 pack be prepared for pickup?

Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.

Which rules apply to Nissan Leaf ZE1 recycling in United States?

EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.

Coverage

Cities collected by Reno, Nevada

Retiring Nissan Leaf ZE1 packs near Reno, Nevada?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.