Tesla Model S Plaid battery recycling in Reno, Nevada
Reno, Nevada does not take whole packs. It receives black mass made from Tesla Model S Plaid modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
4,366 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
45,000 TPA
Hydrometallurgical Refinery
Cities served
7
From Reno, Nevada
Where a Tesla Model S Plaid pack goes from Reno, Nevada
- 1
Collected via Dallas, Texas
Whole packs enter the network at Dallas — Texas Reverse Logistics Yard, 2,190 km away, where they are weighed and de-energised.
- 2
Graded at Fremont, California
Modules travel 291 km to Fremont — California Diagnostics Works for capacity, resistance and impedance testing across all 16 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,309 km). Selective — only low-swell pouch stacks above 82% SOH are cleared for repurposing.
- 4
Refining at Reno, Nevada
Black mass from failed modules is leached and refined here into battery-grade nickel, cobalt and lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dallas — Texas Reverse Logistics Yard | 2,190 km |
| Nearest grading bench | Fremont — California Diagnostics Works | 291 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,309 km |
Faster option
Inside the Tesla Model S Plaid battery
The Tesla Model S Plaid (2021) carries a 100 kWh NCA Pouch pack with 16 modules at 400 V, weighing roughly 540 kg. Premium nickel-cobalt pouch stacks with the highest recovery credit and the strictest safety handling class.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.3% | A — BESS ready | USD 5,456 |
| Year 4 | 91% | A — BESS ready | USD 5,248 |
| Year 6 | 86.7% | A — BESS ready | USD 5,039 |
| Year 8 | 82.4% | B — Second life | USD 4,580 |
| Year 10 | 78.1% | B — Second life | USD 4,220 |
What the chemistry means here
How it ages
NCA can deliver long life when it is kept in a moderate state-of-charge window, but it is sensitive to high voltage and heat. Swelling from gas generation is a common retirement signal in pouch formats.
Thermal behaviour
NCA shares the oxygen-release behaviour of high-nickel cathodes and is generally considered among the more reactive EV chemistries. Pouch cells have no rigid can, so mechanical damage and swelling translate quickly into safety risk.
Handling NCA Pouch
Collecting a Tesla Model S Plaid pack
100 kWh, 16 modules, about 540 kg — this is how the Reno, Nevada team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Reno, Nevada site notes
- Only black mass and cell or cathode scrap are accepted at this site.
- Bulk bags must be sealed, labelled and accompanied by chemistry declarations.
- Deliveries are booked into fixed dock windows at the industrial centre.
- Settlement follows sampling and assay at intake, with results shared with the consignor.
What this pack yields
lithium
5.33 kg
nickel
38.87 kg
cobalt
6.43 kg
manganese
0.63 kg
copper
20.22 kg
aluminium
12.85 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The refinery is permitted through the Nevada Division of Environmental Protection, with conditions on air emissions, water use and hazardous materials. Inbound feed is managed under the applicable US EPA hazardous or universal waste rules, and shipments follow US DOT hazardous materials regulations.
Tesla Model S Plaid in Reno, Nevada: common questions
Can I drop off a Tesla Model S Plaid battery at Reno, Nevada?
Reno, Nevada is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Dallas, Texas, 2,190 km away.
What happens to Tesla Model S Plaid modules after Reno, Nevada?
Collected via Dallas, Texas, then Graded at Fremont, California, then Second life at Gothenburg, Sweden, then Refining at Reno, Nevada. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Tesla Model S Plaid pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tesla Model S Plaid recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
Cities collected by Reno, Nevada
Tesla Model S Plaid at other sites
Retiring Tesla Model S Plaid packs near Reno, Nevada?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.