Euler Motors HiLoad EV battery recycling in Toronto, Ontario
The Euler Motors HiLoad EV is not sold in this market, so packs reach Toronto, Ontario through importers, research and test fleets or cross-border consolidation. They are accepted as whole packs, with extra checks on documentation and transboundary paperwork.
Pack value at 80% SOH
397 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
18,000 TPA
Integrated Recovery Campus
Cities served
2
From Toronto, Ontario
Where a Euler Motors HiLoad EV pack goes from Toronto, Ontario
- 1
Intake at Toronto, Ontario
Packs are palletised in small groups inside UN-rated boxes, with dividers between units. Each pack is weighed, photographed and discharged below 30% state of charge.
- 2
Graded at Atlanta, Georgia
Modules travel 1,183 km to Atlanta — Georgia Grading Centre for capacity, resistance and impedance testing across all 6 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (6,109 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 3,360 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest grading bench | Atlanta — Georgia Grading Centre | 1,183 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 6,109 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 3,360 km |
Faster option
Inside the Euler Motors HiLoad EV battery
The Euler Motors HiLoad EV (2022) carries a 12.4 kWh LFP Prismatic (LiFePO4) pack with 6 modules at 96 V, weighing roughly 92 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.5% | A — BESS ready | USD 646 |
| Year 4 | 92.4% | A — BESS ready | USD 625 |
| Year 6 | 89.3% | A — BESS ready | USD 605 |
| Year 8 | 86.2% | A — BESS ready | USD 575 |
| Year 10 | 83.1% | B — Second life | USD 482 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Euler Motors HiLoad EV pack
12.4 kWh, 6 modules, about 92 kg — this is how the Toronto, Ontario team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Toronto, Ontario site notes
- Winter collections include extra time for weather delays.
- Cross-border loads need export and import documents before collection is confirmed.
- Transit authorities can book depot-level collections.
- Damaged packs must be declared before pickup.
What this pack yields
lithium
0.92 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
2.78 kg
aluminium
3.32 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Canada
Provincial extended producer responsibility regulations
Regulator: Provincial regulators (e.g. RPRA in Ontario) and Transport Canada
The campus operates under approvals from Ontario's Ministry of the Environment, Conservation and Parks. Ontario's producer responsibility framework for batteries applies, transport follows the federal Transportation of Dangerous Goods Regulations, and cross-border movements need waste import and export documentation.
Euler Motors HiLoad EV in Toronto, Ontario: common questions
Can I drop off a Euler Motors HiLoad EV battery at Toronto, Ontario?
Yes, by appointment. Toronto — Ontario Recovery Campus accepts whole Euler Motors HiLoad EV packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.
What happens to Euler Motors HiLoad EV modules after Toronto, Ontario?
Intake at Toronto, Ontario, then Graded at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Euler Motors HiLoad EV pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Euler Motors HiLoad EV recycling in Canada?
Provincial extended producer responsibility regulations, overseen by Provincial regulators (e.g. RPRA in Ontario) and Transport Canada. Movements follow the Transport of Dangerous Goods Regulations, and cross-border shipments need permits under the Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations.
Cities collected by Toronto, Ontario
Euler Motors HiLoad EV at other sites
Other three-wheeler packs at Toronto, Ontario
Retiring Euler Motors HiLoad EV packs near Toronto, Ontario?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.