BYD Seal Performance battery recycling in Toronto, Ontario
Toronto — Ontario Recovery Campus takes whole BYD Seal Performance packs straight from fleets, dealers and workshops. Packs are weighed, de-energised and logged here before modules move on for grading or refining.
Pack value at 80% SOH
2,642 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
18,000 TPA
Integrated Recovery Campus
Cities served
2
From Toronto, Ontario
Where a BYD Seal Performance pack goes from Toronto, Ontario
- 1
Intake at Toronto, Ontario
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.
- 2
Graded at Atlanta, Georgia
Modules travel 1,183 km to Atlanta — Georgia Grading Centre for capacity, resistance and impedance testing across all 1 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (6,109 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 3,360 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest grading bench | Atlanta — Georgia Grading Centre | 1,183 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 6,109 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 3,360 km |
Inside the BYD Seal Performance battery
The BYD Seal Performance (2023) carries a 82.5 kWh LFP Prismatic (LiFePO4) pack with 1 modules at 400 V, weighing roughly 611 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.8% | A — BESS ready | USD 4,310 |
| Year 4 | 92.7% | A — BESS ready | USD 4,174 |
| Year 6 | 89.6% | A — BESS ready | USD 4,037 |
| Year 8 | 86.5% | A — BESS ready | USD 3,891 |
| Year 10 | 83.4% | B — Second life | USD 3,267 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a BYD Seal Performance pack
82.5 kWh, 1 modules, about 611 kg — this is how the Toronto, Ontario team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Toronto, Ontario site notes
- Winter collections include extra time for weather delays.
- Cross-border loads need export and import documents before collection is confirmed.
- Transit authorities can book depot-level collections.
- Damaged packs must be declared before pickup.
What this pack yields
lithium
6.12 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
18.5 kg
aluminium
22.09 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Canada
Provincial extended producer responsibility regulations
Regulator: Provincial regulators (e.g. RPRA in Ontario) and Transport Canada
The campus operates under approvals from Ontario's Ministry of the Environment, Conservation and Parks. Ontario's producer responsibility framework for batteries applies, transport follows the federal Transportation of Dangerous Goods Regulations, and cross-border movements need waste import and export documentation.
BYD Seal Performance in Toronto, Ontario: common questions
Can I drop off a BYD Seal Performance battery at Toronto, Ontario?
Yes, by appointment. Toronto — Ontario Recovery Campus accepts whole BYD Seal Performance packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.
What happens to BYD Seal Performance modules after Toronto, Ontario?
Intake at Toronto, Ontario, then Graded at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a BYD Seal Performance pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to BYD Seal Performance recycling in Canada?
Provincial extended producer responsibility regulations, overseen by Provincial regulators (e.g. RPRA in Ontario) and Transport Canada. Movements follow the Transport of Dangerous Goods Regulations, and cross-border shipments need permits under the Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations.
Cities collected by Toronto, Ontario
BYD Seal Performance at other sites
Retiring BYD Seal Performance packs near Toronto, Ontario?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.