Ather 450 Apex battery recycling in Atlanta, Georgia
Atlanta, Georgia is a diagnostics site: Ather 450 Apex packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
173 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
22,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Atlanta, Georgia
Where a Ather 450 Apex pack goes from Atlanta, Georgia
- 1
Collected via Detroit, Michigan
Whole packs enter the network at Detroit — Michigan Closed-Loop Plant, 961 km away, where they are weighed and de-energised.
- 2
Module grading at Atlanta, Georgia
All 2 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (7,243 km). Good — grade-A modules above 80% SOH qualify for commercial-scale BESS strings.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 3,203 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Detroit — Michigan Closed-Loop Plant | 961 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 7,243 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 3,203 km |
Faster option
Inside the Ather 450 Apex battery
The Ather 450 Apex (2024) carries a 3.7 kWh NMC 811 Cylindrical 2170 pack with 2 modules at 52 V, weighing roughly 21 kg. High-nickel cylindrical cells with the strongest hydrometallurgical recovery credit per tonne of black mass.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 94.5% | A — BESS ready | USD 231 |
| Year 4 | 90.2% | A — BESS ready | USD 222 |
| Year 6 | 85.9% | A — BESS ready | USD 210 |
| Year 8 | 81.6% | B — Second life | USD 182 |
| Year 10 | 77.3% | B — Second life | USD 160 |
What the chemistry means here
How it ages
NMC 811 loses capacity through a mix of SEI growth, cathode surface reconstruction and micro-cracking of nickel-rich particles. Resistance climbs faster than in LFP, which matters as much as capacity for second-life duty.
Thermal behaviour
High-nickel NMC cathodes release oxygen as they decompose, so once runaway starts it is fast and energetic. Cylindrical 2170 cells vent through a designed rupture point, which helps, but cell-to-cell propagation inside a tightly packed module is the main hazard.
Handling NMC 811 (2170)
Collecting a Ather 450 Apex pack
3.7 kWh, 2 modules, about 21 kg — this is how the Atlanta, Georgia team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Atlanta, Georgia site notes
- Fleet depots across the south-east can book consolidated pickups to share transport cost.
- Send serial lists so grading reports map directly to your asset records.
- Damaged or recalled packs must be declared so they ship under the correct DOT provisions.
- Shrink-wrap pallets and label them with the correct UN numbers before collection.
What this pack yields
lithium
0.21 kg
nickel
1.36 kg
cobalt
0.17 kg
manganese
0.16 kg
copper
0.67 kg
aluminium
0.57 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The centre operates under Georgia Environmental Protection Division requirements and manages spent lithium-ion batteries under the US EPA universal waste framework where applicable. Transport follows US DOT hazardous materials rules for lithium batteries.
Ather 450 Apex in Atlanta, Georgia: common questions
Can I drop off a Ather 450 Apex battery at Atlanta, Georgia?
Atlanta, Georgia is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Detroit, Michigan, 961 km away.
What happens to Ather 450 Apex modules after Atlanta, Georgia?
Collected via Detroit, Michigan, then Module grading at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Ather 450 Apex pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ather 450 Apex recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
Ather 450 Apex at other sites
Other two-wheeler packs at Atlanta, Georgia
Retiring Ather 450 Apex packs near Atlanta, Georgia?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.