Ather Rizta Z battery recycling in Atlanta, Georgia
Atlanta, Georgia is a diagnostics site: Ather Rizta Z packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
118 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
22,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Atlanta, Georgia
Where a Ather Rizta Z pack goes from Atlanta, Georgia
- 1
Collected via Detroit, Michigan
Whole packs enter the network at Detroit — Michigan Closed-Loop Plant, 961 km away, where they are weighed and de-energised.
- 2
Module grading at Atlanta, Georgia
All 2 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (7,243 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 3,203 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Detroit — Michigan Closed-Loop Plant | 961 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 7,243 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 3,203 km |
Faster option
Inside the Ather Rizta Z battery
The Ather Rizta Z (2024) carries a 3.7 kWh LFP Prismatic (LiFePO4) pack with 2 modules at 52 V, weighing roughly 27 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.4% | A — BESS ready | USD 194 |
| Year 4 | 93.3% | A — BESS ready | USD 188 |
| Year 6 | 90.2% | A — BESS ready | USD 182 |
| Year 8 | 87.1% | A — BESS ready | USD 176 |
| Year 10 | 84% | B — Second life | USD 152 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Ather Rizta Z pack
3.7 kWh, 2 modules, about 27 kg — this is how the Atlanta, Georgia team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Atlanta, Georgia site notes
- Fleet depots across the south-east can book consolidated pickups to share transport cost.
- Send serial lists so grading reports map directly to your asset records.
- Damaged or recalled packs must be declared so they ship under the correct DOT provisions.
- Shrink-wrap pallets and label them with the correct UN numbers before collection.
What this pack yields
lithium
0.27 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
0.83 kg
aluminium
0.99 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The centre operates under Georgia Environmental Protection Division requirements and manages spent lithium-ion batteries under the US EPA universal waste framework where applicable. Transport follows US DOT hazardous materials rules for lithium batteries.
Ather Rizta Z in Atlanta, Georgia: common questions
Can I drop off a Ather Rizta Z battery at Atlanta, Georgia?
Atlanta, Georgia is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Detroit, Michigan, 961 km away.
What happens to Ather Rizta Z modules after Atlanta, Georgia?
Collected via Detroit, Michigan, then Module grading at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Ather Rizta Z pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ather Rizta Z recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
Ather Rizta Z at other sites
Other two-wheeler packs at Atlanta, Georgia
Retiring Ather Rizta Z packs near Atlanta, Georgia?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.