Tesla Model Y (4680 Structural) battery recycling in Lyon, France
Lyon, France does not take whole packs. It receives black mass made from Tesla Model Y (4680 Structural) modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
3,545 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
23,000 TPA
Hydrometallurgical Refinery
Cities served
3
From Lyon, France
Where a Tesla Model Y (4680 Structural) pack goes from Lyon, France
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 5,003 km away, where they are weighed and de-energised.
- 2
Graded at Stuttgart, Germany
Modules travel 469 km to Stuttgart — Baden-Wurttemberg Grading Works for capacity, resistance and impedance testing across all 3 modules.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 47% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (790 km). Moderate — structural pack bonding limits module harvesting; cell-level grading required.
- 4
Refining at Lyon, France
Black mass from failed modules is leached and refined here into battery-grade nickel, cobalt and lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 5,003 km |
| Nearest grading bench | Stuttgart — Baden-Wurttemberg Grading Works | 469 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 790 km |
Faster option
Inside the Tesla Model Y (4680 Structural) battery
The Tesla Model Y (4680 Structural) (2022) carries a 82 kWh NMC 811 Cylindrical 4680 pack with 3 modules at 355 V, weighing roughly 418 kg. Structural tabless format requiring specialised disassembly cells. High nickel yields offset elevated processing cost.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 94.2% | A — BESS ready | USD 4,607 |
| Year 4 | 89.9% | A — BESS ready | USD 4,425 |
| Year 6 | 85.6% | A — BESS ready | USD 4,162 |
| Year 8 | 81.3% | B — Second life | USD 3,674 |
| Year 10 | 77% | B — Second life | USD 3,281 |
What the chemistry means here
How it ages
Fade mechanisms mirror other NMC 811 cells. The tabless design lowers internal resistance and heat generation, which can slow resistance growth relative to older cylindrical formats.
Thermal behaviour
4680 cells carry the same high-nickel chemistry as 2170s but in a larger can with more energy per cell, so a single failing cell releases more heat. Structural packs also make it harder to isolate an individual failing cell during handling.
Handling NMC 811 (4680)
Collecting a Tesla Model Y (4680 Structural) pack
82 kWh, 3 modules, about 418 kg — this is how the Lyon, France team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Lyon, France site notes
- Only black mass and scrap are accepted.
- Cross-border shipments need prior documentation.
- Bulk bags must be sealed and labelled.
- Settlement follows assay at intake.
What this pack yields
lithium
4.49 kg
nickel
29.01 kg
cobalt
2.91 kg
manganese
3.03 kg
copper
12.26 kg
aluminium
14.08 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in France
EU Battery Regulation (EU) 2023/1542 and the French EPR (REP) system
Regulator: Ministry for Ecological Transition, with ADEME overseeing producer responsibility schemes
The refinery operates under French permitting for classified installations (ICPE) and the EU Battery Regulation (EU) 2023/1542. Waste shipments follow the EU Waste Shipment Regulation.
Tesla Model Y (4680 Structural) in Lyon, France: common questions
Can I drop off a Tesla Model Y (4680 Structural) battery at Lyon, France?
Lyon, France is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 5,003 km away.
What happens to Tesla Model Y (4680 Structural) modules after Lyon, France?
Collected via Dubai, UAE, then Graded at Stuttgart, Germany, then Second life at Zwickau, Saxony, then Refining at Lyon, France. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Tesla Model Y (4680 Structural) pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tesla Model Y (4680 Structural) recycling in France?
EU Battery Regulation (EU) 2023/1542 and the French EPR (REP) system, overseen by Ministry for Ecological Transition, with ADEME overseeing producer responsibility schemes. Road transport follows ADR, and cross-border shipments follow the EU Waste Shipment Regulation.
Cities collected by Lyon, France
Tesla Model Y (4680 Structural) at other sites
Retiring Tesla Model Y (4680 Structural) packs near Lyon, France?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.