Tata Xpres-T EV battery recycling in Melbourne, Victoria
The Tata Xpres-T EV is not sold in this market, so packs reach Melbourne, Victoria through importers, research and test fleets or cross-border consolidation. They are accepted as whole packs, with extra checks on documentation and transboundary paperwork.
Pack value at 80% SOH
689 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
12,000 TPA
Reverse Logistics Yard
Cities served
2
From Melbourne, Victoria
Where a Tata Xpres-T EV pack goes from Melbourne, Victoria
- 1
Intake at Melbourne, Victoria
Each pack travels in a rated crate or on a restrained pallet, with coolant drained and ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.
- 2
Graded at Tuas, Singapore
Modules travel 6,072 km to Singapore — Tuas Diagnostics Hub for capacity, resistance and impedance testing across all 8 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (15,980 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Ningde, Fujian
Remaining modules are shredded to black mass and refined at Ningde — Fujian Refining Base, 7,644 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest grading bench | Singapore — Tuas Diagnostics Hub | 6,072 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 15,980 km |
| Nearest refinery | Ningde — Fujian Refining Base | 7,644 km |
Faster option
Inside the Tata Xpres-T EV battery
The Tata Xpres-T EV (2021) carries a 21.5 kWh LFP Prismatic (LiFePO4) pack with 8 modules at 300 V, weighing roughly 159 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.1% | A — BESS ready | USD 1,127 |
| Year 4 | 93% | A — BESS ready | USD 1,091 |
| Year 6 | 89.9% | A — BESS ready | USD 1,056 |
| Year 8 | 86.8% | A — BESS ready | USD 1,020 |
| Year 10 | 83.7% | B — Second life | USD 867 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Tata Xpres-T EV pack
21.5 kWh, 8 modules, about 159 kg — this is how the Melbourne, Victoria team plans the job.
Removal
Large packs are removed at the depot with a forklift-rated battery table and the vehicle isolated under lock-out tag-out.
Packaging
Each pack travels in a rated crate or on a restrained pallet, with coolant drained and ports sealed.
Consolidation
Depot retirements are batched against the fleet replacement schedule so collections line up with vehicle swaps.
Before the truck arrives
- Share telematics SOH history if it is available
- Confirm forklift access and dock height at the depot
- Isolate high-voltage systems under lock-out tag-out
- Declare any pack involved in a collision
Melbourne, Victoria site notes
- Declare chemistry and state of charge at booking.
- Storage installers can book collections.
- Damaged units require special handling.
- Consolidated loads reduce transport cost.
What this pack yields
lithium
1.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
4.82 kg
aluminium
5.76 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Australia
Product Stewardship Act 2011 and state waste legislation
Regulator: DCCEEW (federal) and state EPAs
The yard operates under Victorian environmental rules administered by EPA Victoria and national battery stewardship arrangements. Transport follows the Australian Dangerous Goods Code.
Tata Xpres-T EV in Melbourne, Victoria: common questions
Can I drop off a Tata Xpres-T EV battery at Melbourne, Victoria?
Yes, by appointment. Melbourne — Victoria Collection Yard accepts whole Tata Xpres-T EV packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.
What happens to Tata Xpres-T EV modules after Melbourne, Victoria?
Intake at Melbourne, Victoria, then Graded at Tuas, Singapore, then Second life at Gothenburg, Sweden, then Refined at Ningde, Fujian. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Tata Xpres-T EV pack be prepared for pickup?
Share telematics SOH history if it is available. Confirm forklift access and dock height at the depot. Isolate high-voltage systems under lock-out tag-out. Declare any pack involved in a collision.
Which rules apply to Tata Xpres-T EV recycling in Australia?
Product Stewardship Act 2011 and state waste legislation, overseen by DCCEEW (federal) and state EPAs. Road movements follow the Australian Dangerous Goods Code, with lithium-ion batteries shipped as Class 9 under UN 3480 or UN 3481.
Cities collected by Melbourne, Victoria
Tata Xpres-T EV at other sites
Other commercial fleet packs at Melbourne, Victoria
Retiring Tata Xpres-T EV packs near Melbourne, Victoria?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.