EVBatteryRecycling
Cross-border intakePassenger · LFP Prismatic

Tata Punch EV battery recycling in Toronto, Ontario

The Tata Punch EV is not sold in this market, so packs reach Toronto, Ontario through importers, research and test fleets or cross-border consolidation. They are accepted as whole packs, with extra checks on documentation and transboundary paperwork.

Pack value at 80% SOH

1,121 USD

Hybrid Split

Second-life share

56%

At 80% SOH

Site capacity

18,000 TPA

Integrated Recovery Campus

Cities served

2

From Toronto, Ontario

Tata Punch EV pack data
Route

Where a Tata Punch EV pack goes from Toronto, Ontario

  1. 1

    Intake at Toronto, Ontario

    One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.

  2. 2

    Graded at Atlanta, Georgia

    Modules travel 1,183 km to Atlanta — Georgia Grading Centre for capacity, resistance and impedance testing across all 12 modules.

  3. 3

    Second life at Gothenburg, Sweden

    At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (6,109 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.

  4. 4

    Refined at Reno, Nevada

    Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 3,360 km away.

StageFacilityDistance
Nearest grading benchAtlanta — Georgia Grading Centre1,183 km
Nearest second-life worksGothenburg — Nordic Second-Life Campus6,109 km
Nearest refineryReno — Nevada Hydrometallurgy Refinery3,360 km
Straight-line distances from Toronto, Ontario to the next facilities in the network.

Faster option

The closest direct intake sites for Tata Punch EV packs are Narela, Delhi (11,604 km) and Unnao, Uttar Pradesh (11,943 km).
The pack

Inside the Tata Punch EV battery

The Tata Punch EV (2024) carries a 35 kWh LFP Prismatic (LiFePO4) pack with 12 modules at 330 V, weighing roughly 259 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.

Service yearSOHGradeValue
Year 296.1%A — BESS readyUSD 1,834
Year 493%A — BESS readyUSD 1,776
Year 689.9%A — BESS readyUSD 1,718
Year 886.8%A — BESS readyUSD 1,660
Year 1083.7%B — Second lifeUSD 1,411
Modelled state of health and residual value for the Tata Punch EV pack.
LFP Prismatic

What the chemistry means here

01

How it ages

LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.

02

Thermal behaviour

LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.

Handling LFP Prismatic

Prismatic LFP cans are heavy and rigid: palletise them upright, restrain them against movement and keep terminals capped. Swelling is less common than in pouch cells but any bulged can goes straight to quarantine.
Passenger handling

Collecting a Tata Punch EV pack

35 kWh, 12 modules, about 259 kg — this is how the Toronto, Ontario team plans the job.

Removing a passenger EV battery pack for recycling
01

Removal

Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.

02

Packaging

One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.

03

Consolidation

Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.

Before the truck arrives

  • Pull the service disconnect and record pack voltage
  • Drain or cap coolant lines before lifting
  • Photograph the pack casing and any impact damage
  • Keep the VIN and pack serial together on the manifest

Toronto, Ontario site notes

  • Winter collections include extra time for weather delays.
  • Cross-border loads need export and import documents before collection is confirmed.
  • Transit authorities can book depot-level collections.
  • Damaged packs must be declared before pickup.
Recovery

What this pack yields

lithium

2.6 kg

nickel

0 kg

cobalt

0 kg

manganese

0 kg

copper

7.85 kg

aluminium

9.37 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in Canada

Provincial extended producer responsibility regulations

Regulator: Provincial regulators (e.g. RPRA in Ontario) and Transport Canada

The campus operates under approvals from Ontario's Ministry of the Environment, Conservation and Parks. Ontario's producer responsibility framework for batteries applies, transport follows the federal Transportation of Dangerous Goods Regulations, and cross-border movements need waste import and export documentation.

FAQ

Tata Punch EV in Toronto, Ontario: common questions

Can I drop off a Tata Punch EV battery at Toronto, Ontario?

Yes, by appointment. Toronto — Ontario Recovery Campus accepts whole Tata Punch EV packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.

What happens to Tata Punch EV modules after Toronto, Ontario?

Intake at Toronto, Ontario, then Graded at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.

How should a Tata Punch EV pack be prepared for pickup?

Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.

Which rules apply to Tata Punch EV recycling in Canada?

Provincial extended producer responsibility regulations, overseen by Provincial regulators (e.g. RPRA in Ontario) and Transport Canada. Movements follow the Transport of Dangerous Goods Regulations, and cross-border shipments need permits under the Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations.

Coverage

Cities collected by Toronto, Ontario

Retiring Tata Punch EV packs near Toronto, Ontario?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.