Piaggio Ape E-City battery recycling in Rotterdam, South Holland
Rotterdam, South Holland does not take whole packs. It receives black mass made from Piaggio Ape E-City modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
256 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
30,000 TPA
Hydrometallurgical Refinery
Cities served
2
From Rotterdam, South Holland
Where a Piaggio Ape E-City pack goes from Rotterdam, South Holland
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 5,174 km away, where they are weighed and de-energised.
- 2
Graded at Birmingham, England
Modules travel 439 km to Birmingham — West Midlands Grading Works for capacity, resistance and impedance testing across all 4 modules.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 56% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (572 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refining at Rotterdam, South Holland
Black mass from failed modules is leached and refined here into battery-grade lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 5,174 km |
| Nearest grading bench | Birmingham — West Midlands Grading Works | 439 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 572 km |
Faster option
Inside the Piaggio Ape E-City battery
The Piaggio Ape E-City (2021) carries a 8 kWh LFP Prismatic (LiFePO4) pack with 4 modules at 60 V, weighing roughly 59 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.8% | A — BESS ready | USD 422 |
| Year 4 | 93.7% | A — BESS ready | USD 409 |
| Year 6 | 90.6% | A — BESS ready | USD 396 |
| Year 8 | 87.5% | A — BESS ready | USD 383 |
| Year 10 | 84.4% | B — Second life | USD 336 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Piaggio Ape E-City pack
8 kWh, 4 modules, about 59 kg — this is how the Rotterdam, South Holland team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Rotterdam, South Holland site notes
- Only black mass and cathode scrap are accepted.
- Cross-border shipments need prior notification where applicable.
- Bulk bags must be sealed and labelled.
- Sampling at intake determines settlement.
What this pack yields
lithium
0.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
1.79 kg
aluminium
2.14 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Netherlands
EU Battery Regulation (EU) 2023/1542 and the Dutch Environmental Management Act
Regulator: Ministry of Infrastructure and Water Management, with enforcement by ILT
The works operates under Dutch environmental permits and the EU Battery Regulation (EU) 2023/1542, including recycling efficiency and material recovery targets. Cross-border waste shipments follow the EU Waste Shipment Regulation and, where relevant, Basel Convention procedures.
Piaggio Ape E-City in Rotterdam, South Holland: common questions
Can I drop off a Piaggio Ape E-City battery at Rotterdam, South Holland?
Rotterdam, South Holland is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 5,174 km away.
What happens to Piaggio Ape E-City modules after Rotterdam, South Holland?
Collected via Dubai, UAE, then Graded at Birmingham, England, then Second life at Zwickau, Saxony, then Refining at Rotterdam, South Holland. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Piaggio Ape E-City pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Piaggio Ape E-City recycling in Netherlands?
EU Battery Regulation (EU) 2023/1542 and the Dutch Environmental Management Act, overseen by Ministry of Infrastructure and Water Management, with enforcement by ILT. Road transport follows ADR and sea transport follows the IMDG Code, with frequent transhipment through Rotterdam.
Cities collected by Rotterdam, South Holland
Piaggio Ape E-City at other sites
Other three-wheeler packs at Rotterdam, South Holland
Retiring Piaggio Ape E-City packs near Rotterdam, South Holland?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.