Piaggio Ape E-City battery recycling in Hosur, Tamil Nadu
Hosur, Tamil Nadu is a diagnostics site: Piaggio Ape E-City packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
256 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
14,000 TPA
Cell Grading & Diagnostics
Cities served
9
From Hosur, Tamil Nadu
Where a Piaggio Ape E-City pack goes from Hosur, Tamil Nadu
- 1
Collected via Zaheerabad, Telangana
Whole packs enter the network at Hyderabad — Zaheerabad Recovery Campus, 550 km away, where they are weighed and de-energised.
- 2
Module grading at Hosur, Tamil Nadu
All 4 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Butibori, Maharashtra
At 80% SOH about 56% of the pack qualifies for reuse and goes to Nagpur — Butibori Second-Life Works (918 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Sriperumbudur, Tamil Nadu
Remaining modules are shredded to black mass and refined at Chennai — Sriperumbudur Recovery Campus, 230 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Hyderabad — Zaheerabad Recovery Campus | 550 km |
| Nearest second-life works | Nagpur — Butibori Second-Life Works | 918 km |
| Nearest refinery | Chennai — Sriperumbudur Recovery Campus | 230 km |
Faster option
Inside the Piaggio Ape E-City battery
The Piaggio Ape E-City (2021) carries a 8 kWh LFP Prismatic (LiFePO4) pack with 4 modules at 60 V, weighing roughly 59 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.8% | A — BESS ready | USD 422 |
| Year 4 | 93.7% | A — BESS ready | USD 409 |
| Year 6 | 90.6% | A — BESS ready | USD 396 |
| Year 8 | 87.5% | A — BESS ready | USD 383 |
| Year 10 | 84.4% | B — Second life | USD 336 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Piaggio Ape E-City pack
8 kWh, 4 modules, about 59 kg — this is how the Hosur, Tamil Nadu team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Hosur, Tamil Nadu site notes
- Box or crate two-wheeler packs individually; loose-stacked packs are repacked on arrival and slow intake.
- Swap operators can set up recurring weekly collections from Bengaluru depots.
- Send a serial list with each load so bench results map directly back to your asset records.
- Packs with visible swelling must be declared and are tested only in the isolated quarantine room.
What this pack yields
lithium
0.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
1.79 kg
aluminium
2.14 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in India
Battery Waste Management Rules 2022 (BWMR)
Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards
The centre operates under Tamil Nadu Pollution Control Board consent and grades material for producers registered under the Battery Waste Management Rules 2022. Because much of its intake crosses the state border from Karnataka, interstate transport documentation and waste descriptions are checked at the gate before unloading.
Piaggio Ape E-City in Hosur, Tamil Nadu: common questions
Can I drop off a Piaggio Ape E-City battery at Hosur, Tamil Nadu?
Hosur, Tamil Nadu is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Zaheerabad, Telangana, 550 km away.
What happens to Piaggio Ape E-City modules after Hosur, Tamil Nadu?
Collected via Zaheerabad, Telangana, then Module grading at Hosur, Tamil Nadu, then Second life at Butibori, Maharashtra, then Refined at Sriperumbudur, Tamil Nadu. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Piaggio Ape E-City pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Piaggio Ape E-City recycling in India?
Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.
Cities collected by Hosur, Tamil Nadu
Piaggio Ape E-City at other sites
Other three-wheeler packs at Hosur, Tamil Nadu
Retiring Piaggio Ape E-City packs near Hosur, Tamil Nadu?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.