EVBatteryRecycling
Grading stagePassenger · LFP Prismatic

MG Windsor EV battery recycling in Warsaw, Mazovia

Warsaw, Mazovia is a diagnostics site: MG Windsor EV packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.

Pack value at 80% SOH

1,217 USD

Hybrid Split

Second-life share

56%

At 80% SOH

Site capacity

17,000 TPA

Cell Grading & Diagnostics

Cities served

0

From Warsaw, Mazovia

MG Windsor EV pack data
Route

Where a MG Windsor EV pack goes from Warsaw, Mazovia

  1. 1

    Collected via Dubai, UAE

    Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 4,157 km away, where they are weighed and de-energised.

  2. 2

    Module grading at Warsaw, Mazovia

    All 12 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.

  3. 3

    Second life at Zwickau, Saxony

    At 80% SOH about 56% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (613 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.

  4. 4

    Refined at Rotterdam, South Holland

    Remaining modules are shredded to black mass and refined at Rotterdam — Maasvlakte Refining Works, 1,128 km away.

StageFacilityDistance
Nearest intake yardDubai — Jebel Ali Logistics Yard4,157 km
Nearest second-life worksZwickau — Saxony Second-Life Works613 km
Nearest refineryRotterdam — Maasvlakte Refining Works1,128 km
Straight-line distances from Warsaw, Mazovia to the next facilities in the network.

Faster option

The closest direct intake sites for MG Windsor EV packs are Narela, Delhi (5,237 km) and Sanand, Gujarat (5,410 km).
The pack

Inside the MG Windsor EV battery

The MG Windsor EV (2024) carries a 38 kWh LFP Prismatic (LiFePO4) pack with 12 modules at 340 V, weighing roughly 281 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.

Service yearSOHGradeValue
Year 295.9%A — BESS readyUSD 1,987
Year 492.8%A — BESS readyUSD 1,924
Year 689.7%A — BESS readyUSD 1,862
Year 886.6%A — BESS readyUSD 1,799
Year 1083.5%B — Second lifeUSD 1,514
Modelled state of health and residual value for the MG Windsor EV pack.
LFP Prismatic

What the chemistry means here

01

How it ages

LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.

02

Thermal behaviour

LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.

Handling LFP Prismatic

Prismatic LFP cans are heavy and rigid: palletise them upright, restrain them against movement and keep terminals capped. Swelling is less common than in pouch cells but any bulged can goes straight to quarantine.
Passenger handling

Collecting a MG Windsor EV pack

38 kWh, 12 modules, about 281 kg — this is how the Warsaw, Mazovia team plans the job.

Removing a passenger EV battery pack for recycling
01

Removal

Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.

02

Packaging

One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.

03

Consolidation

Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.

Before the truck arrives

  • Pull the service disconnect and record pack voltage
  • Drain or cap coolant lines before lifting
  • Photograph the pack casing and any impact damage
  • Keep the VIN and pack serial together on the manifest

Warsaw, Mazovia site notes

  • Cross-border loads need appropriate shipment documents.
  • Bus operators should book in advance for large packs.
  • Send a serial list with each load.
  • Declare damaged packs before collection.
Recovery

What this pack yields

lithium

2.82 kg

nickel

0 kg

cobalt

0 kg

manganese

0 kg

copper

8.52 kg

aluminium

10.17 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in Poland

EU Battery Regulation (EU) 2023/1542 and the Polish Act on Batteries and Accumulators

Regulator: Chief Inspectorate of Environmental Protection (GIOS), with the BDO waste database

The centre operates under Polish environmental permits and the EU Battery Regulation (EU) 2023/1542. Transport follows ADR dangerous-goods rules, and cross-border movements follow EU waste shipment requirements.

FAQ

MG Windsor EV in Warsaw, Mazovia: common questions

Can I drop off a MG Windsor EV battery at Warsaw, Mazovia?

Warsaw, Mazovia is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 4,157 km away.

What happens to MG Windsor EV modules after Warsaw, Mazovia?

Collected via Dubai, UAE, then Module grading at Warsaw, Mazovia, then Second life at Zwickau, Saxony, then Refined at Rotterdam, South Holland. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.

How should a MG Windsor EV pack be prepared for pickup?

Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.

Which rules apply to MG Windsor EV recycling in Poland?

EU Battery Regulation (EU) 2023/1542 and the Polish Act on Batteries and Accumulators, overseen by Chief Inspectorate of Environmental Protection (GIOS), with the BDO waste database. Road transport follows ADR, and cross-border shipments follow the EU Waste Shipment Regulation.

Retiring MG Windsor EV packs near Warsaw, Mazovia?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.