MG Windsor EV battery recycling in Fremont, California
Fremont, California is a diagnostics site: MG Windsor EV packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
1,217 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
24,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Fremont, California
Where a MG Windsor EV pack goes from Fremont, California
- 1
Collected via Dallas, Texas
Whole packs enter the network at Dallas — Texas Reverse Logistics Yard, 2,343 km away, where they are weighed and de-energised.
- 2
Module grading at Fremont, California
All 12 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,586 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 291 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dallas — Texas Reverse Logistics Yard | 2,343 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,586 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 291 km |
Faster option
Inside the MG Windsor EV battery
The MG Windsor EV (2024) carries a 38 kWh LFP Prismatic (LiFePO4) pack with 12 modules at 340 V, weighing roughly 281 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.9% | A — BESS ready | USD 1,987 |
| Year 4 | 92.8% | A — BESS ready | USD 1,924 |
| Year 6 | 89.7% | A — BESS ready | USD 1,862 |
| Year 8 | 86.6% | A — BESS ready | USD 1,799 |
| Year 10 | 83.5% | B — Second life | USD 1,514 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a MG Windsor EV pack
38 kWh, 12 modules, about 281 kg — this is how the Fremont, California team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Fremont, California site notes
- Experimental cells must be declared with chemistry and any known hazards.
- Dismantlers should remove and secure packs before the collection vehicle arrives.
- Include VINs or serial numbers to support California record-keeping.
- Damaged packs require advance notice and ship under separate paperwork.
What this pack yields
lithium
2.82 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
8.52 kg
aluminium
10.17 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The works operates under California's demanding hazardous-waste regime, overseen by the Department of Toxic Substances Control, alongside local permitting. California has also legislated towards producer responsibility for EV batteries, so records are kept in a form that supports evolving requirements. Transport follows US DOT hazardous materials rules.
MG Windsor EV in Fremont, California: common questions
Can I drop off a MG Windsor EV battery at Fremont, California?
Fremont, California is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Dallas, Texas, 2,343 km away.
What happens to MG Windsor EV modules after Fremont, California?
Collected via Dallas, Texas, then Module grading at Fremont, California, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a MG Windsor EV pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to MG Windsor EV recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
MG Windsor EV at other sites
Other passenger packs at Fremont, California
Retiring MG Windsor EV packs near Fremont, California?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.