EVBatteryRecycling
Cross-border intakeThree-Wheeler · LMO Pouch

Mahindra Treo Auto battery recycling in Melbourne, Victoria

The Mahindra Treo Auto is not sold in this market, so packs reach Melbourne, Victoria through importers, research and test fleets or cross-border consolidation. They are accepted as whole packs, with extra checks on documentation and transboundary paperwork.

Pack value at 80% SOH

215 USD

Hybrid Split

Second-life share

47%

At 80% SOH

Site capacity

12,000 TPA

Reverse Logistics Yard

Cities served

2

From Melbourne, Victoria

Mahindra Treo Auto pack data
Route

Where a Mahindra Treo Auto pack goes from Melbourne, Victoria

  1. 1

    Intake at Melbourne, Victoria

    Packs are palletised in small groups inside UN-rated boxes, with dividers between units. Each pack is weighed, photographed and discharged below 30% state of charge.

  2. 2

    Graded at Tuas, Singapore

    Modules travel 6,072 km to Singapore — Tuas Diagnostics Hub for capacity, resistance and impedance testing across all 4 modules.

  3. 3

    Second life at Gothenburg, Sweden

    At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (15,980 km). Limited — accelerated manganese dissolution caps second-life warranty terms at 36 months.

  4. 4

    Refined at Ningde, Fujian

    Remaining modules are shredded to black mass and refined at Ningde — Fujian Refining Base, 7,644 km away.

StageFacilityDistance
Nearest grading benchSingapore — Tuas Diagnostics Hub6,072 km
Nearest second-life worksGothenburg — Nordic Second-Life Campus15,980 km
Nearest refineryNingde — Fujian Refining Base7,644 km
Straight-line distances from Melbourne, Victoria to the next facilities in the network.

Faster option

The closest direct intake sites for Mahindra Treo Auto packs are Khordha, Odisha (8,941 km) and Changsari, Assam (9,036 km).
The pack

Inside the Mahindra Treo Auto battery

The Mahindra Treo Auto (2019) carries a 7.37 kWh LMO / LMO-NMC Pouch pack with 4 modules at 48 V, weighing roughly 60 kg. Legacy manganese-rich pouch packs common in early two- and three-wheeler fleets across South Asia.

Service yearSOHGradeValue
Year 294.3%A — BESS readyUSD 264
Year 490%A — BESS readyUSD 254
Year 685.7%A — BESS readyUSD 241
Year 881.4%B — Second lifeUSD 221
Year 1077.1%B — Second lifeUSD 205
Modelled state of health and residual value for the Mahindra Treo Auto pack.
LMO Pouch

What the chemistry means here

01

How it ages

LMO's weak point is manganese dissolution, which speeds up at elevated temperature and damages the anode. Packs that lived in hot climates without active cooling typically fade faster.

02

Thermal behaviour

Manganese spinel is more thermally stable than nickel-rich cathodes, but blended LMO-NMC pouch cells still vent flammable gas when abused, and older packs may have weaker protection electronics.

Handling LMO Pouch

Many LMO packs come from early two- and three-wheelers and informal service channels. Expect missing documentation, check for prior repair and quarantine anything with swelling or corrosion.
Three-Wheeler handling

Collecting a Mahindra Treo Auto pack

7.37 kWh, 4 modules, about 60 kg — this is how the Melbourne, Victoria team plans the job.

Removing a three-wheeler EV battery pack for recycling
01

Removal

Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.

02

Packaging

Packs are palletised in small groups inside UN-rated boxes, with dividers between units.

03

Consolidation

Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.

Before the truck arrives

  • Check for corrosion and water ingress in the pack bay
  • Flag any aftermarket or repaired packs on the manifest
  • Tape terminals and remove quick-connect plugs
  • Group packs by chemistry before collection

Melbourne, Victoria site notes

  • Declare chemistry and state of charge at booking.
  • Storage installers can book collections.
  • Damaged units require special handling.
  • Consolidated loads reduce transport cost.
Recovery

What this pack yields

lithium

0.52 kg

nickel

1.11 kg

cobalt

0.16 kg

manganese

3.24 kg

copper

2.04 kg

aluminium

2.29 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in Australia

Product Stewardship Act 2011 and state waste legislation

Regulator: DCCEEW (federal) and state EPAs

The yard operates under Victorian environmental rules administered by EPA Victoria and national battery stewardship arrangements. Transport follows the Australian Dangerous Goods Code.

FAQ

Mahindra Treo Auto in Melbourne, Victoria: common questions

Can I drop off a Mahindra Treo Auto battery at Melbourne, Victoria?

Yes, by appointment. Melbourne — Victoria Collection Yard accepts whole Mahindra Treo Auto packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.

What happens to Mahindra Treo Auto modules after Melbourne, Victoria?

Intake at Melbourne, Victoria, then Graded at Tuas, Singapore, then Second life at Gothenburg, Sweden, then Refined at Ningde, Fujian. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.

How should a Mahindra Treo Auto pack be prepared for pickup?

Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.

Which rules apply to Mahindra Treo Auto recycling in Australia?

Product Stewardship Act 2011 and state waste legislation, overseen by DCCEEW (federal) and state EPAs. Road movements follow the Australian Dangerous Goods Code, with lithium-ion batteries shipped as Class 9 under UN 3480 or UN 3481.

Coverage

Cities collected by Melbourne, Victoria

Retiring Mahindra Treo Auto packs near Melbourne, Victoria?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.