Euler Motors HiLoad EV battery recycling in Fremont, California
Fremont, California is a diagnostics site: Euler Motors HiLoad EV packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
397 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
24,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Fremont, California
Where a Euler Motors HiLoad EV pack goes from Fremont, California
- 1
Collected via Dallas, Texas
Whole packs enter the network at Dallas — Texas Reverse Logistics Yard, 2,343 km away, where they are weighed and de-energised.
- 2
Module grading at Fremont, California
All 6 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,586 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 291 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dallas — Texas Reverse Logistics Yard | 2,343 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,586 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 291 km |
Faster option
Inside the Euler Motors HiLoad EV battery
The Euler Motors HiLoad EV (2022) carries a 12.4 kWh LFP Prismatic (LiFePO4) pack with 6 modules at 96 V, weighing roughly 92 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.5% | A — BESS ready | USD 646 |
| Year 4 | 92.4% | A — BESS ready | USD 625 |
| Year 6 | 89.3% | A — BESS ready | USD 605 |
| Year 8 | 86.2% | A — BESS ready | USD 575 |
| Year 10 | 83.1% | B — Second life | USD 482 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Euler Motors HiLoad EV pack
12.4 kWh, 6 modules, about 92 kg — this is how the Fremont, California team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Fremont, California site notes
- Experimental cells must be declared with chemistry and any known hazards.
- Dismantlers should remove and secure packs before the collection vehicle arrives.
- Include VINs or serial numbers to support California record-keeping.
- Damaged packs require advance notice and ship under separate paperwork.
What this pack yields
lithium
0.92 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
2.78 kg
aluminium
3.32 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The works operates under California's demanding hazardous-waste regime, overseen by the Department of Toxic Substances Control, alongside local permitting. California has also legislated towards producer responsibility for EV batteries, so records are kept in a form that supports evolving requirements. Transport follows US DOT hazardous materials rules.
Euler Motors HiLoad EV in Fremont, California: common questions
Can I drop off a Euler Motors HiLoad EV battery at Fremont, California?
Fremont, California is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Dallas, Texas, 2,343 km away.
What happens to Euler Motors HiLoad EV modules after Fremont, California?
Collected via Dallas, Texas, then Module grading at Fremont, California, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Euler Motors HiLoad EV pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Euler Motors HiLoad EV recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
Euler Motors HiLoad EV at other sites
Other three-wheeler packs at Fremont, California
Retiring Euler Motors HiLoad EV packs near Fremont, California?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.