Tesla Model Y (4680 Structural) battery recycling in Ulsan, South Korea
Ulsan — Korea Recovery Campus takes whole Tesla Model Y (4680 Structural) packs straight from fleets, dealers and workshops. Packs are weighed, de-energised and logged here before modules move on for grading or refining.
Pack value at 80% SOH
3,545 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
34,000 TPA
Integrated Recovery Campus
Cities served
2
From Ulsan, South Korea
Where a Tesla Model Y (4680 Structural) pack goes from Ulsan, South Korea
- 1
Intake at Ulsan, South Korea
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.
- 2
Graded at Yokohama, Kanagawa
Modules travel 935 km to Yokohama — Kanagawa Diagnostics Works for capacity, resistance and impedance testing across all 3 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,121 km). Moderate — structural pack bonding limits module harvesting; cell-level grading required.
- 4
Refined at Ningde, Fujian
Remaining modules are shredded to black mass and refined at Ningde — Fujian Refining Base, 1,354 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest grading bench | Yokohama — Kanagawa Diagnostics Works | 935 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,121 km |
| Nearest refinery | Ningde — Fujian Refining Base | 1,354 km |
Inside the Tesla Model Y (4680 Structural) battery
The Tesla Model Y (4680 Structural) (2022) carries a 82 kWh NMC 811 Cylindrical 4680 pack with 3 modules at 355 V, weighing roughly 418 kg. Structural tabless format requiring specialised disassembly cells. High nickel yields offset elevated processing cost.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 94.2% | A — BESS ready | USD 4,607 |
| Year 4 | 89.9% | A — BESS ready | USD 4,425 |
| Year 6 | 85.6% | A — BESS ready | USD 4,162 |
| Year 8 | 81.3% | B — Second life | USD 3,674 |
| Year 10 | 77% | B — Second life | USD 3,281 |
What the chemistry means here
How it ages
Fade mechanisms mirror other NMC 811 cells. The tabless design lowers internal resistance and heat generation, which can slow resistance growth relative to older cylindrical formats.
Thermal behaviour
4680 cells carry the same high-nickel chemistry as 2170s but in a larger can with more energy per cell, so a single failing cell releases more heat. Structural packs also make it harder to isolate an individual failing cell during handling.
Handling NMC 811 (4680)
Collecting a Tesla Model Y (4680 Structural) pack
82 kWh, 3 modules, about 418 kg — this is how the Ulsan, South Korea team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Ulsan, South Korea site notes
- Manufacturers can arrange recurring scrap collections.
- Declare chemistry and format at booking.
- Large packs need advance notice.
- Damaged units require special handling.
What this pack yields
lithium
4.49 kg
nickel
29.01 kg
cobalt
2.91 kg
manganese
3.03 kg
copper
12.26 kg
aluminium
14.08 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in South Korea
Act on Resource Circulation of Electrical and Electronic Equipment and Vehicles
Regulator: Ministry of Environment, with Korea Environment Corporation
The campus operates under Korean environmental permitting and national rules on waste and resource recycling, including producer responsibility schemes. Transport follows Korean dangerous goods regulations.
Tesla Model Y (4680 Structural) in Ulsan, South Korea: common questions
Can I drop off a Tesla Model Y (4680 Structural) battery at Ulsan, South Korea?
Yes, by appointment. Ulsan — Korea Recovery Campus accepts whole Tesla Model Y (4680 Structural) packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.
What happens to Tesla Model Y (4680 Structural) modules after Ulsan, South Korea?
Intake at Ulsan, South Korea, then Graded at Yokohama, Kanagawa, then Second life at Gothenburg, Sweden, then Refined at Ningde, Fujian. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Tesla Model Y (4680 Structural) pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tesla Model Y (4680 Structural) recycling in South Korea?
Act on Resource Circulation of Electrical and Electronic Equipment and Vehicles, overseen by Ministry of Environment, with Korea Environment Corporation. Transport follows national dangerous goods rules, with lithium-ion batteries packaged under UN 3480 / UN 3481.
Cities collected by Ulsan, South Korea
Tesla Model Y (4680 Structural) at other sites
Other passenger packs at Ulsan, South Korea
Retiring Tesla Model Y (4680 Structural) packs near Ulsan, South Korea?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.