Tesla Model S Plaid battery recycling in Rotterdam, South Holland
Rotterdam, South Holland does not take whole packs. It receives black mass made from Tesla Model S Plaid modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
4,366 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
30,000 TPA
Hydrometallurgical Refinery
Cities served
2
From Rotterdam, South Holland
Where a Tesla Model S Plaid pack goes from Rotterdam, South Holland
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 5,174 km away, where they are weighed and de-energised.
- 2
Graded at Birmingham, England
Modules travel 439 km to Birmingham — West Midlands Grading Works for capacity, resistance and impedance testing across all 16 modules.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 47% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (572 km). Selective — only low-swell pouch stacks above 82% SOH are cleared for repurposing.
- 4
Refining at Rotterdam, South Holland
Black mass from failed modules is leached and refined here into battery-grade nickel, cobalt and lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 5,174 km |
| Nearest grading bench | Birmingham — West Midlands Grading Works | 439 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 572 km |
Faster option
Inside the Tesla Model S Plaid battery
The Tesla Model S Plaid (2021) carries a 100 kWh NCA Pouch pack with 16 modules at 400 V, weighing roughly 540 kg. Premium nickel-cobalt pouch stacks with the highest recovery credit and the strictest safety handling class.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.3% | A — BESS ready | USD 5,456 |
| Year 4 | 91% | A — BESS ready | USD 5,248 |
| Year 6 | 86.7% | A — BESS ready | USD 5,039 |
| Year 8 | 82.4% | B — Second life | USD 4,580 |
| Year 10 | 78.1% | B — Second life | USD 4,220 |
What the chemistry means here
How it ages
NCA can deliver long life when it is kept in a moderate state-of-charge window, but it is sensitive to high voltage and heat. Swelling from gas generation is a common retirement signal in pouch formats.
Thermal behaviour
NCA shares the oxygen-release behaviour of high-nickel cathodes and is generally considered among the more reactive EV chemistries. Pouch cells have no rigid can, so mechanical damage and swelling translate quickly into safety risk.
Handling NCA Pouch
Collecting a Tesla Model S Plaid pack
100 kWh, 16 modules, about 540 kg — this is how the Rotterdam, South Holland team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Rotterdam, South Holland site notes
- Only black mass and cathode scrap are accepted.
- Cross-border shipments need prior notification where applicable.
- Bulk bags must be sealed and labelled.
- Sampling at intake determines settlement.
What this pack yields
lithium
5.33 kg
nickel
38.87 kg
cobalt
6.43 kg
manganese
0.63 kg
copper
20.22 kg
aluminium
12.85 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Netherlands
EU Battery Regulation (EU) 2023/1542 and the Dutch Environmental Management Act
Regulator: Ministry of Infrastructure and Water Management, with enforcement by ILT
The works operates under Dutch environmental permits and the EU Battery Regulation (EU) 2023/1542, including recycling efficiency and material recovery targets. Cross-border waste shipments follow the EU Waste Shipment Regulation and, where relevant, Basel Convention procedures.
Tesla Model S Plaid in Rotterdam, South Holland: common questions
Can I drop off a Tesla Model S Plaid battery at Rotterdam, South Holland?
Rotterdam, South Holland is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 5,174 km away.
What happens to Tesla Model S Plaid modules after Rotterdam, South Holland?
Collected via Dubai, UAE, then Graded at Birmingham, England, then Second life at Zwickau, Saxony, then Refining at Rotterdam, South Holland. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Tesla Model S Plaid pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tesla Model S Plaid recycling in Netherlands?
EU Battery Regulation (EU) 2023/1542 and the Dutch Environmental Management Act, overseen by Ministry of Infrastructure and Water Management, with enforcement by ILT. Road transport follows ADR and sea transport follows the IMDG Code, with frequent transhipment through Rotterdam.
Cities collected by Rotterdam, South Holland
Tesla Model S Plaid at other sites
Other passenger packs at Rotterdam, South Holland
Retiring Tesla Model S Plaid packs near Rotterdam, South Holland?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.