Tata Nexon EV Prime battery recycling in Narela, Delhi
Delhi — Narela Collection Yard takes whole Tata Nexon EV Prime packs straight from fleets, dealers and workshops. Packs are weighed, de-energised and logged here before modules move on for grading or refining.
Pack value at 80% SOH
967 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
12,000 TPA
Reverse Logistics Yard
Cities served
0
From Narela, Delhi
Where a Tata Nexon EV Prime pack goes from Narela, Delhi
- 1
Intake at Narela, Delhi
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.
- 2
Graded at Gurugram, Haryana
Modules travel 48 km to NCR — Gurugram Collection & Grading Hub for capacity, resistance and impedance testing across all 12 modules.
- 3
Second life at Mandi Gobindgarh, Punjab
At 80% SOH about 56% of the pack qualifies for reuse and goes to Ludhiana — Mandi Gobindgarh Second-Life Works (257 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Haldia, West Bengal
Remaining modules are shredded to black mass and refined at Kolkata — Haldia Refining Works, 1,337 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest grading bench | NCR — Gurugram Collection & Grading Hub | 48 km |
| Nearest second-life works | Ludhiana — Mandi Gobindgarh Second-Life Works | 257 km |
| Nearest refinery | Kolkata — Haldia Refining Works | 1,337 km |
Inside the Tata Nexon EV Prime battery
The Tata Nexon EV Prime (2020) carries a 30.2 kWh LFP Prismatic (LiFePO4) pack with 12 modules at 320 V, weighing roughly 224 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.7% | A — BESS ready | USD 1,576 |
| Year 4 | 92.6% | A — BESS ready | USD 1,526 |
| Year 6 | 89.5% | A — BESS ready | USD 1,476 |
| Year 8 | 86.4% | A — BESS ready | USD 1,417 |
| Year 10 | 83.3% | B — Second life | USD 1,189 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Tata Nexon EV Prime pack
30.2 kWh, 12 modules, about 224 kg — this is how the Narela, Delhi team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Narela, Delhi site notes
- Delhi goods-vehicle timing restrictions apply, so pickups are booked into permitted entry windows.
- Aggregators should present each load with unit counts and declared chemistry to speed weighbridge intake.
- E-rickshaw batteries need protected terminals and must be secured so they cannot shift in transit.
- Damaged units go directly to the quarantine area and are logged separately.
What this pack yields
lithium
2.24 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
6.77 kg
aluminium
8.09 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in India
Battery Waste Management Rules 2022 (BWMR)
Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards
The yard operates under Delhi Pollution Control Committee consent and within the Battery Waste Management Rules 2022. Aggregators delivering to Narela are expected to hold the registrations the rules require of them, and the yard's unit-level records support producers' EPR reporting further down the chain.
Tata Nexon EV Prime in Narela, Delhi: common questions
Can I drop off a Tata Nexon EV Prime battery at Narela, Delhi?
Yes, by appointment. Delhi — Narela Collection Yard accepts whole Tata Nexon EV Prime packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.
What happens to Tata Nexon EV Prime modules after Narela, Delhi?
Intake at Narela, Delhi, then Graded at Gurugram, Haryana, then Second life at Mandi Gobindgarh, Punjab, then Refined at Haldia, West Bengal. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Tata Nexon EV Prime pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tata Nexon EV Prime recycling in India?
Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.
Tata Nexon EV Prime at other sites
Retiring Tata Nexon EV Prime packs near Narela, Delhi?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.