Piaggio Ape E-City battery recycling in Butibori, Maharashtra
Butibori, Maharashtra receives graded Piaggio Ape E-City modules that passed as grade A or B and rebuilds them into warrantied stationary storage.
Pack value at 80% SOH
256 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
9,500 TPA
Second-Life BESS Works
Cities served
0
From Butibori, Maharashtra
Where a Piaggio Ape E-City pack goes from Butibori, Maharashtra
- 1
Collected via Zaheerabad, Telangana
Whole packs enter the network at Hyderabad — Zaheerabad Recovery Campus, 387 km away, where they are weighed and de-energised.
- 2
Graded at Pithampur, Madhya Pradesh
Modules travel 385 km to Indore — Pithampur Grading Plant for capacity, resistance and impedance testing across all 4 modules.
- 3
Second-life build at Butibori, Maharashtra
Grade A and B modules — about 56% of a pack at 80% SOH — are matched and rebuilt into storage systems on site.
- 4
Refined at Atchutapuram, Andhra Pradesh
Remaining modules are shredded to black mass and refined at Visakhapatnam — Atchutapuram Refinery, 558 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Hyderabad — Zaheerabad Recovery Campus | 387 km |
| Nearest grading bench | Indore — Pithampur Grading Plant | 385 km |
| Nearest refinery | Visakhapatnam — Atchutapuram Refinery | 558 km |
Faster option
Inside the Piaggio Ape E-City battery
The Piaggio Ape E-City (2021) carries a 8 kWh LFP Prismatic (LiFePO4) pack with 4 modules at 60 V, weighing roughly 59 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.8% | A — BESS ready | USD 422 |
| Year 4 | 93.7% | A — BESS ready | USD 409 |
| Year 6 | 90.6% | A — BESS ready | USD 396 |
| Year 8 | 87.5% | A — BESS ready | USD 383 |
| Year 10 | 84.4% | B — Second life | USD 336 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Piaggio Ape E-City pack
8 kWh, 4 modules, about 59 kg — this is how the Butibori, Maharashtra team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Butibori, Maharashtra site notes
- Whole packs are not accepted; modules must arrive already graded.
- Each module needs its grade report and serial number.
- Finished units are dispatched on scheduled delivery runs agreed with the buyer.
- Buyers can inspect systems before dispatch by appointment.
What this pack yields
lithium
0.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
1.79 kg
aluminium
2.14 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in India
Battery Waste Management Rules 2022 (BWMR)
Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards
The works operates under Maharashtra Pollution Control Board consent. Repurposed storage systems are built to applicable Indian electrical and safety requirements, and the provenance of every module is recorded so each system can be traced back to its source packs.
Piaggio Ape E-City in Butibori, Maharashtra: common questions
Can I drop off a Piaggio Ape E-City battery at Butibori, Maharashtra?
Butibori, Maharashtra is a second-life bess works and does not accept whole packs from customers. Book a collection and the pack enters the network at Zaheerabad, Telangana, 387 km away.
What happens to Piaggio Ape E-City modules after Butibori, Maharashtra?
Collected via Zaheerabad, Telangana, then Graded at Pithampur, Madhya Pradesh, then Second-life build at Butibori, Maharashtra, then Refined at Atchutapuram, Andhra Pradesh. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Piaggio Ape E-City pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Piaggio Ape E-City recycling in India?
Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.
Piaggio Ape E-City at other sites
Other three-wheeler packs at Butibori, Maharashtra
Retiring Piaggio Ape E-City packs near Butibori, Maharashtra?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.