Piaggio Ape E-City battery recycling in Mandi Gobindgarh, Punjab
Mandi Gobindgarh, Punjab receives graded Piaggio Ape E-City modules that passed as grade A or B and rebuilds them into warrantied stationary storage.
Pack value at 80% SOH
256 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
7,500 TPA
Second-Life BESS Works
Cities served
0
From Mandi Gobindgarh, Punjab
Where a Piaggio Ape E-City pack goes from Mandi Gobindgarh, Punjab
- 1
Collected via Narela, Delhi
Whole packs enter the network at Delhi — Narela Collection Yard, 257 km away, where they are weighed and de-energised.
- 2
Graded at Gurugram, Haryana
Modules travel 298 km to NCR — Gurugram Collection & Grading Hub for capacity, resistance and impedance testing across all 4 modules.
- 3
Second-life build at Mandi Gobindgarh, Punjab
Grade A and B modules — about 56% of a pack at 80% SOH — are matched and rebuilt into storage systems on site.
- 4
Refined at Haldia, West Bengal
Remaining modules are shredded to black mass and refined at Kolkata — Haldia Refining Works, 1,564 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Delhi — Narela Collection Yard | 257 km |
| Nearest grading bench | NCR — Gurugram Collection & Grading Hub | 298 km |
| Nearest refinery | Kolkata — Haldia Refining Works | 1,564 km |
Faster option
Inside the Piaggio Ape E-City battery
The Piaggio Ape E-City (2021) carries a 8 kWh LFP Prismatic (LiFePO4) pack with 4 modules at 60 V, weighing roughly 59 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.8% | A — BESS ready | USD 422 |
| Year 4 | 93.7% | A — BESS ready | USD 409 |
| Year 6 | 90.6% | A — BESS ready | USD 396 |
| Year 8 | 87.5% | A — BESS ready | USD 383 |
| Year 10 | 84.4% | B — Second life | USD 336 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Piaggio Ape E-City pack
8 kWh, 4 modules, about 59 kg — this is how the Mandi Gobindgarh, Punjab team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Mandi Gobindgarh, Punjab site notes
- Only graded modules are accepted.
- Each module must include its grade report.
- Delivery of finished systems is scheduled with the customer.
- Site inspections are available by appointment.
What this pack yields
lithium
0.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
1.79 kg
aluminium
2.14 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in India
Battery Waste Management Rules 2022 (BWMR)
Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards
The works operates under Punjab Pollution Control Board consent and builds systems to applicable Indian electrical and safety requirements, with module traceability maintained from source pack to finished unit.
Piaggio Ape E-City in Mandi Gobindgarh, Punjab: common questions
Can I drop off a Piaggio Ape E-City battery at Mandi Gobindgarh, Punjab?
Mandi Gobindgarh, Punjab is a second-life bess works and does not accept whole packs from customers. Book a collection and the pack enters the network at Narela, Delhi, 257 km away.
What happens to Piaggio Ape E-City modules after Mandi Gobindgarh, Punjab?
Collected via Narela, Delhi, then Graded at Gurugram, Haryana, then Second-life build at Mandi Gobindgarh, Punjab, then Refined at Haldia, West Bengal. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Piaggio Ape E-City pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Piaggio Ape E-City recycling in India?
Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.
Piaggio Ape E-City at other sites
Other three-wheeler packs at Mandi Gobindgarh, Punjab
Retiring Piaggio Ape E-City packs near Mandi Gobindgarh, Punjab?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.