Ola Electric S1 X+ battery recycling in Fremont, California
Fremont, California is a diagnostics site: Ola Electric S1 X+ packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
112 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
24,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Fremont, California
Where a Ola Electric S1 X+ pack goes from Fremont, California
- 1
Collected via Dallas, Texas
Whole packs enter the network at Dallas — Texas Reverse Logistics Yard, 2,343 km away, where they are weighed and de-energised.
- 2
Module grading at Fremont, California
All 2 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,586 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Reno, Nevada
Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 291 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dallas — Texas Reverse Logistics Yard | 2,343 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,586 km |
| Nearest refinery | Reno — Nevada Hydrometallurgy Refinery | 291 km |
Faster option
Inside the Ola Electric S1 X+ battery
The Ola Electric S1 X+ (2024) carries a 3.5 kWh LFP Prismatic (LiFePO4) pack with 2 modules at 48 V, weighing roughly 26 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.3% | A — BESS ready | USD 184 |
| Year 4 | 93.2% | A — BESS ready | USD 178 |
| Year 6 | 90.1% | A — BESS ready | USD 172 |
| Year 8 | 87% | A — BESS ready | USD 166 |
| Year 10 | 83.9% | B — Second life | USD 143 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Ola Electric S1 X+ pack
3.5 kWh, 2 modules, about 26 kg — this is how the Fremont, California team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Fremont, California site notes
- Experimental cells must be declared with chemistry and any known hazards.
- Dismantlers should remove and secure packs before the collection vehicle arrives.
- Include VINs or serial numbers to support California record-keeping.
- Damaged packs require advance notice and ship under separate paperwork.
What this pack yields
lithium
0.26 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
0.79 kg
aluminium
0.94 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United States
EPA universal waste rules, DOT hazardous materials regulations and state programmes
Regulator: EPA, DOT PHMSA and state environmental agencies
The works operates under California's demanding hazardous-waste regime, overseen by the Department of Toxic Substances Control, alongside local permitting. California has also legislated towards producer responsibility for EV batteries, so records are kept in a form that supports evolving requirements. Transport follows US DOT hazardous materials rules.
Ola Electric S1 X+ in Fremont, California: common questions
Can I drop off a Ola Electric S1 X+ battery at Fremont, California?
Fremont, California is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Dallas, Texas, 2,343 km away.
What happens to Ola Electric S1 X+ modules after Fremont, California?
Collected via Dallas, Texas, then Module grading at Fremont, California, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Ola Electric S1 X+ pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ola Electric S1 X+ recycling in United States?
EPA universal waste rules, DOT hazardous materials regulations and state programmes, overseen by EPA, DOT PHMSA and state environmental agencies. Shipments follow DOT PHMSA 49 CFR requirements, with damaged or defective batteries under stricter special permits and packaging.
Ola Electric S1 X+ at other sites
Other two-wheeler packs at Fremont, California
Retiring Ola Electric S1 X+ packs near Fremont, California?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.