MG Windsor EV battery recycling in Zwickau, Saxony
Zwickau, Saxony receives graded MG Windsor EV modules that passed as grade A or B and rebuilds them into warrantied stationary storage.
Pack value at 80% SOH
1,217 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
20,000 TPA
Second-Life BESS Works
Cities served
0
From Zwickau, Saxony
Where a MG Windsor EV pack goes from Zwickau, Saxony
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 4,604 km away, where they are weighed and de-energised.
- 2
Graded at Stuttgart, Germany
Modules travel 321 km to Stuttgart — Baden-Wurttemberg Grading Works for capacity, resistance and impedance testing across all 12 modules.
- 3
Second-life build at Zwickau, Saxony
Grade A and B modules — about 56% of a pack at 80% SOH — are matched and rebuilt into storage systems on site.
- 4
Refined at Rotterdam, South Holland
Remaining modules are shredded to black mass and refined at Rotterdam — Maasvlakte Refining Works, 572 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 4,604 km |
| Nearest grading bench | Stuttgart — Baden-Wurttemberg Grading Works | 321 km |
| Nearest refinery | Rotterdam — Maasvlakte Refining Works | 572 km |
Faster option
Inside the MG Windsor EV battery
The MG Windsor EV (2024) carries a 38 kWh LFP Prismatic (LiFePO4) pack with 12 modules at 340 V, weighing roughly 281 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.9% | A — BESS ready | USD 1,987 |
| Year 4 | 92.8% | A — BESS ready | USD 1,924 |
| Year 6 | 89.7% | A — BESS ready | USD 1,862 |
| Year 8 | 86.6% | A — BESS ready | USD 1,799 |
| Year 10 | 83.5% | B — Second life | USD 1,514 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a MG Windsor EV pack
38 kWh, 12 modules, about 281 kg — this is how the Zwickau, Saxony team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Zwickau, Saxony site notes
- Only graded modules are accepted.
- Modules need grade reports and traceable serial numbers.
- Finished systems are delivered on scheduled runs.
- Buyers can arrange site visits before purchase.
What this pack yields
lithium
2.82 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
8.52 kg
aluminium
10.17 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Germany
EU Battery Regulation (EU) 2023/1542 and national implementing law
Regulator: Umweltbundesamt (UBA) with registration through stiftung ear
Operations are subject to German permitting, including the Federal Immission Control Act where applicable, and to the EU Battery Regulation (EU) 2023/1542, which covers repurposed batteries and producer responsibility. Systems are built to applicable European safety standards.
MG Windsor EV in Zwickau, Saxony: common questions
Can I drop off a MG Windsor EV battery at Zwickau, Saxony?
Zwickau, Saxony is a second-life bess works and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 4,604 km away.
What happens to MG Windsor EV modules after Zwickau, Saxony?
Collected via Dubai, UAE, then Graded at Stuttgart, Germany, then Second-life build at Zwickau, Saxony, then Refined at Rotterdam, South Holland. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a MG Windsor EV pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to MG Windsor EV recycling in Germany?
EU Battery Regulation (EU) 2023/1542 and national implementing law, overseen by Umweltbundesamt (UBA) with registration through stiftung ear. Road transport follows ADR, and shipments out of Germany fall under the EU Waste Shipment Regulation.
MG Windsor EV at other sites
Retiring MG Windsor EV packs near Zwickau, Saxony?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.