MG Comet EV battery recycling in Ningde, Fujian
Ningde, Fujian does not take whole packs. It receives black mass made from MG Comet EV modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
554 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
48,000 TPA
Hydrometallurgical Refinery
Cities served
4
From Ningde, Fujian
Where a MG Comet EV pack goes from Ningde, Fujian
- 1
Collected via Ulsan, South Korea
Whole packs enter the network at Ulsan — Korea Recovery Campus, 1,354 km away, where they are weighed and de-energised.
- 2
Graded at Yokohama, Kanagawa
Modules travel 2,142 km to Yokohama — Kanagawa Diagnostics Works for capacity, resistance and impedance testing across all 6 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,495 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refining at Ningde, Fujian
Black mass from failed modules is leached and refined here into battery-grade lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Ulsan — Korea Recovery Campus | 1,354 km |
| Nearest grading bench | Yokohama — Kanagawa Diagnostics Works | 2,142 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,495 km |
Faster option
Inside the MG Comet EV battery
The MG Comet EV (2023) carries a 17.3 kWh LFP Prismatic (LiFePO4) pack with 6 modules at 280 V, weighing roughly 128 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.3% | A — BESS ready | USD 908 |
| Year 4 | 93.2% | A — BESS ready | USD 880 |
| Year 6 | 90.1% | A — BESS ready | USD 851 |
| Year 8 | 87% | A — BESS ready | USD 823 |
| Year 10 | 83.9% | B — Second life | USD 706 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a MG Comet EV pack
17.3 kWh, 6 modules, about 128 kg — this is how the Ningde, Fujian team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Ningde, Fujian site notes
- Only black mass and scrap are accepted.
- Import eligibility must be confirmed before shipment.
- Bulk bags must be sealed and labelled.
- Settlement follows assay at intake.
What this pack yields
lithium
1.28 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
3.88 kg
aluminium
4.63 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in China
MIIT management measures for new energy vehicle power battery recycling
Regulator: Ministry of Industry and Information Technology (MIIT)
The base operates under Chinese environmental permitting and national rules for recycling new energy vehicle batteries, including traceability requirements. Imports are subject to Chinese customs controls and solid waste import restrictions.
MG Comet EV in Ningde, Fujian: common questions
Can I drop off a MG Comet EV battery at Ningde, Fujian?
Ningde, Fujian is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Ulsan, South Korea, 1,354 km away.
What happens to MG Comet EV modules after Ningde, Fujian?
Collected via Ulsan, South Korea, then Graded at Yokohama, Kanagawa, then Second life at Gothenburg, Sweden, then Refining at Ningde, Fujian. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a MG Comet EV pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to MG Comet EV recycling in China?
MIIT management measures for new energy vehicle power battery recycling, overseen by Ministry of Industry and Information Technology (MIIT). Road transport of retired power batteries follows national dangerous goods rules, with packaging and labelling set by national standards.
Cities collected by Ningde, Fujian
MG Comet EV at other sites
Retiring MG Comet EV packs near Ningde, Fujian?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.