Tesla Model S Plaid battery recycling in Ningde, Fujian
Ningde, Fujian does not take whole packs. It receives black mass made from Tesla Model S Plaid modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
4,366 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
48,000 TPA
Hydrometallurgical Refinery
Cities served
4
From Ningde, Fujian
Where a Tesla Model S Plaid pack goes from Ningde, Fujian
- 1
Collected via Ulsan, South Korea
Whole packs enter the network at Ulsan — Korea Recovery Campus, 1,354 km away, where they are weighed and de-energised.
- 2
Graded at Yokohama, Kanagawa
Modules travel 2,142 km to Yokohama — Kanagawa Diagnostics Works for capacity, resistance and impedance testing across all 16 modules.
- 3
Second life at Gothenburg, Sweden
At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,495 km). Selective — only low-swell pouch stacks above 82% SOH are cleared for repurposing.
- 4
Refining at Ningde, Fujian
Black mass from failed modules is leached and refined here into battery-grade nickel, cobalt and lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Ulsan — Korea Recovery Campus | 1,354 km |
| Nearest grading bench | Yokohama — Kanagawa Diagnostics Works | 2,142 km |
| Nearest second-life works | Gothenburg — Nordic Second-Life Campus | 8,495 km |
Faster option
Inside the Tesla Model S Plaid battery
The Tesla Model S Plaid (2021) carries a 100 kWh NCA Pouch pack with 16 modules at 400 V, weighing roughly 540 kg. Premium nickel-cobalt pouch stacks with the highest recovery credit and the strictest safety handling class.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.3% | A — BESS ready | USD 5,456 |
| Year 4 | 91% | A — BESS ready | USD 5,248 |
| Year 6 | 86.7% | A — BESS ready | USD 5,039 |
| Year 8 | 82.4% | B — Second life | USD 4,580 |
| Year 10 | 78.1% | B — Second life | USD 4,220 |
What the chemistry means here
How it ages
NCA can deliver long life when it is kept in a moderate state-of-charge window, but it is sensitive to high voltage and heat. Swelling from gas generation is a common retirement signal in pouch formats.
Thermal behaviour
NCA shares the oxygen-release behaviour of high-nickel cathodes and is generally considered among the more reactive EV chemistries. Pouch cells have no rigid can, so mechanical damage and swelling translate quickly into safety risk.
Handling NCA Pouch
Collecting a Tesla Model S Plaid pack
100 kWh, 16 modules, about 540 kg — this is how the Ningde, Fujian team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Ningde, Fujian site notes
- Only black mass and scrap are accepted.
- Import eligibility must be confirmed before shipment.
- Bulk bags must be sealed and labelled.
- Settlement follows assay at intake.
What this pack yields
lithium
5.33 kg
nickel
38.87 kg
cobalt
6.43 kg
manganese
0.63 kg
copper
20.22 kg
aluminium
12.85 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in China
MIIT management measures for new energy vehicle power battery recycling
Regulator: Ministry of Industry and Information Technology (MIIT)
The base operates under Chinese environmental permitting and national rules for recycling new energy vehicle batteries, including traceability requirements. Imports are subject to Chinese customs controls and solid waste import restrictions.
Tesla Model S Plaid in Ningde, Fujian: common questions
Can I drop off a Tesla Model S Plaid battery at Ningde, Fujian?
Ningde, Fujian is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Ulsan, South Korea, 1,354 km away.
What happens to Tesla Model S Plaid modules after Ningde, Fujian?
Collected via Ulsan, South Korea, then Graded at Yokohama, Kanagawa, then Second life at Gothenburg, Sweden, then Refining at Ningde, Fujian. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Tesla Model S Plaid pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to Tesla Model S Plaid recycling in China?
MIIT management measures for new energy vehicle power battery recycling, overseen by Ministry of Industry and Information Technology (MIIT). Road transport of retired power batteries follows national dangerous goods rules, with packaging and labelling set by national standards.
Cities collected by Ningde, Fujian
Tesla Model S Plaid at other sites
Retiring Tesla Model S Plaid packs near Ningde, Fujian?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.