EVBatteryRecycling
Grading stageThree-Wheeler · LMO Pouch

Mahindra Treo Auto battery recycling in Pithampur, Madhya Pradesh

Pithampur, Madhya Pradesh is a diagnostics site: Mahindra Treo Auto packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.

Pack value at 80% SOH

215 USD

Hybrid Split

Second-life share

47%

At 80% SOH

Site capacity

11,000 TPA

Cell Grading & Diagnostics

Cities served

0

From Pithampur, Madhya Pradesh

Mahindra Treo Auto pack data
Route

Where a Mahindra Treo Auto pack goes from Pithampur, Madhya Pradesh

  1. 1

    Collected via Sanand, Gujarat

    Whole packs enter the network at Gujarat — Sanand Reverse Logistics Yard, 341 km away, where they are weighed and de-energised.

  2. 2

    Module grading at Pithampur, Madhya Pradesh

    All 4 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.

  3. 3

    Second life at Butibori, Maharashtra

    At 80% SOH about 47% of the pack qualifies for reuse and goes to Nagpur — Butibori Second-Life Works (385 km). Limited — accelerated manganese dissolution caps second-life warranty terms at 36 months.

  4. 4

    Refined at Atchutapuram, Andhra Pradesh

    Remaining modules are shredded to black mass and refined at Visakhapatnam — Atchutapuram Refinery, 938 km away.

StageFacilityDistance
Nearest intake yardGujarat — Sanand Reverse Logistics Yard341 km
Nearest second-life worksNagpur — Butibori Second-Life Works385 km
Nearest refineryVisakhapatnam — Atchutapuram Refinery938 km
Straight-line distances from Pithampur, Madhya Pradesh to the next facilities in the network.

Faster option

The closest direct intake sites for Mahindra Treo Auto packs are Sanand, Gujarat (341 km) and Chakan, Maharashtra (468 km).
The pack

Inside the Mahindra Treo Auto battery

The Mahindra Treo Auto (2019) carries a 7.37 kWh LMO / LMO-NMC Pouch pack with 4 modules at 48 V, weighing roughly 60 kg. Legacy manganese-rich pouch packs common in early two- and three-wheeler fleets across South Asia.

Service yearSOHGradeValue
Year 294.3%A — BESS readyUSD 264
Year 490%A — BESS readyUSD 254
Year 685.7%A — BESS readyUSD 241
Year 881.4%B — Second lifeUSD 221
Year 1077.1%B — Second lifeUSD 205
Modelled state of health and residual value for the Mahindra Treo Auto pack.
LMO Pouch

What the chemistry means here

01

How it ages

LMO's weak point is manganese dissolution, which speeds up at elevated temperature and damages the anode. Packs that lived in hot climates without active cooling typically fade faster.

02

Thermal behaviour

Manganese spinel is more thermally stable than nickel-rich cathodes, but blended LMO-NMC pouch cells still vent flammable gas when abused, and older packs may have weaker protection electronics.

Handling LMO Pouch

Many LMO packs come from early two- and three-wheelers and informal service channels. Expect missing documentation, check for prior repair and quarantine anything with swelling or corrosion.
Three-Wheeler handling

Collecting a Mahindra Treo Auto pack

7.37 kWh, 4 modules, about 60 kg — this is how the Pithampur, Madhya Pradesh team plans the job.

Removing a three-wheeler EV battery pack for recycling
01

Removal

Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.

02

Packaging

Packs are palletised in small groups inside UN-rated boxes, with dividers between units.

03

Consolidation

Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.

Before the truck arrives

  • Check for corrosion and water ingress in the pack bay
  • Flag any aftermarket or repaired packs on the manifest
  • Tape terminals and remove quick-connect plugs
  • Group packs by chemistry before collection

Pithampur, Madhya Pradesh site notes

  • Book large commercial packs in advance so bench space and handling equipment are free.
  • Tell us module formats at booking so matching fixtures are prepared.
  • Suppliers in the Pithampur cluster can arrange regular pickups.
  • Damaged units need a separate declaration and are handled in isolation.
Recovery

What this pack yields

lithium

0.52 kg

nickel

1.11 kg

cobalt

0.16 kg

manganese

3.24 kg

copper

2.04 kg

aluminium

2.29 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in India

Battery Waste Management Rules 2022 (BWMR)

Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards

The plant operates under Madhya Pradesh Pollution Control Board consent and handles battery waste within the Battery Waste Management Rules 2022 framework, passing custody records on to the recycler that issues EPR evidence.

FAQ

Mahindra Treo Auto in Pithampur, Madhya Pradesh: common questions

Can I drop off a Mahindra Treo Auto battery at Pithampur, Madhya Pradesh?

Pithampur, Madhya Pradesh is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Sanand, Gujarat, 341 km away.

What happens to Mahindra Treo Auto modules after Pithampur, Madhya Pradesh?

Collected via Sanand, Gujarat, then Module grading at Pithampur, Madhya Pradesh, then Second life at Butibori, Maharashtra, then Refined at Atchutapuram, Andhra Pradesh. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.

How should a Mahindra Treo Auto pack be prepared for pickup?

Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.

Which rules apply to Mahindra Treo Auto recycling in India?

Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.

Retiring Mahindra Treo Auto packs near Pithampur, Madhya Pradesh?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.