BYD Atto 3 battery recycling in Warsaw, Mazovia
Warsaw, Mazovia is a diagnostics site: BYD Atto 3 packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
1,938 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
17,000 TPA
Cell Grading & Diagnostics
Cities served
0
From Warsaw, Mazovia
Where a BYD Atto 3 pack goes from Warsaw, Mazovia
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 4,157 km away, where they are weighed and de-energised.
- 2
Module grading at Warsaw, Mazovia
All 1 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 56% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (613 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Rotterdam, South Holland
Remaining modules are shredded to black mass and refined at Rotterdam — Maasvlakte Refining Works, 1,128 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 4,157 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 613 km |
| Nearest refinery | Rotterdam — Maasvlakte Refining Works | 1,128 km |
Faster option
Inside the BYD Atto 3 battery
The BYD Atto 3 (2022) carries a 60.5 kWh LFP Prismatic (LiFePO4) pack with 1 modules at 400 V, weighing roughly 448 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.5% | A — BESS ready | USD 3,183 |
| Year 4 | 93.4% | A — BESS ready | USD 3,083 |
| Year 6 | 90.3% | A — BESS ready | USD 2,983 |
| Year 8 | 87.2% | A — BESS ready | USD 2,883 |
| Year 10 | 84.1% | B — Second life | USD 2,496 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a BYD Atto 3 pack
60.5 kWh, 1 modules, about 448 kg — this is how the Warsaw, Mazovia team plans the job.
Removal
Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.
Packaging
One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.
Consolidation
Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.
Before the truck arrives
- Pull the service disconnect and record pack voltage
- Drain or cap coolant lines before lifting
- Photograph the pack casing and any impact damage
- Keep the VIN and pack serial together on the manifest
Warsaw, Mazovia site notes
- Cross-border loads need appropriate shipment documents.
- Bus operators should book in advance for large packs.
- Send a serial list with each load.
- Declare damaged packs before collection.
What this pack yields
lithium
4.49 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
13.57 kg
aluminium
16.2 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Poland
EU Battery Regulation (EU) 2023/1542 and the Polish Act on Batteries and Accumulators
Regulator: Chief Inspectorate of Environmental Protection (GIOS), with the BDO waste database
The centre operates under Polish environmental permits and the EU Battery Regulation (EU) 2023/1542. Transport follows ADR dangerous-goods rules, and cross-border movements follow EU waste shipment requirements.
BYD Atto 3 in Warsaw, Mazovia: common questions
Can I drop off a BYD Atto 3 battery at Warsaw, Mazovia?
Warsaw, Mazovia is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 4,157 km away.
What happens to BYD Atto 3 modules after Warsaw, Mazovia?
Collected via Dubai, UAE, then Module grading at Warsaw, Mazovia, then Second life at Zwickau, Saxony, then Refined at Rotterdam, South Holland. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a BYD Atto 3 pack be prepared for pickup?
Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.
Which rules apply to BYD Atto 3 recycling in Poland?
EU Battery Regulation (EU) 2023/1542 and the Polish Act on Batteries and Accumulators, overseen by Chief Inspectorate of Environmental Protection (GIOS), with the BDO waste database. Road transport follows ADR, and cross-border shipments follow the EU Waste Shipment Regulation.
BYD Atto 3 at other sites
Retiring BYD Atto 3 packs near Warsaw, Mazovia?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.