EVBatteryRecycling
Direct intake sitePassenger · LFP Prismatic

BYD Atto 3 battery recycling in Monterrey, Nuevo Leon

Monterrey — Nuevo Leon Logistics Yard takes whole BYD Atto 3 packs straight from fleets, dealers and workshops. Packs are weighed, de-energised and logged here before modules move on for grading or refining.

Pack value at 80% SOH

1,938 USD

Hybrid Split

Second-life share

56%

At 80% SOH

Site capacity

15,000 TPA

Reverse Logistics Yard

Cities served

1

From Monterrey, Nuevo Leon

BYD Atto 3 pack data
Route

Where a BYD Atto 3 pack goes from Monterrey, Nuevo Leon

  1. 1

    Intake at Monterrey, Nuevo Leon

    One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.

  2. 2

    Graded at Atlanta, Georgia

    Modules travel 1,777 km to Atlanta — Georgia Grading Centre for capacity, resistance and impedance testing across all 1 modules.

  3. 3

    Second life at Gothenburg, Sweden

    At 80% SOH about 56% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (8,829 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.

  4. 4

    Refined at Reno, Nevada

    Remaining modules are shredded to black mass and refined at Reno — Nevada Hydrometallurgy Refinery, 2,378 km away.

StageFacilityDistance
Nearest grading benchAtlanta — Georgia Grading Centre1,777 km
Nearest second-life worksGothenburg — Nordic Second-Life Campus8,829 km
Nearest refineryReno — Nevada Hydrometallurgy Refinery2,378 km
Straight-line distances from Monterrey, Nuevo Leon to the next facilities in the network.
The pack

Inside the BYD Atto 3 battery

The BYD Atto 3 (2022) carries a 60.5 kWh LFP Prismatic (LiFePO4) pack with 1 modules at 400 V, weighing roughly 448 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.

Service yearSOHGradeValue
Year 296.5%A — BESS readyUSD 3,183
Year 493.4%A — BESS readyUSD 3,083
Year 690.3%A — BESS readyUSD 2,983
Year 887.2%A — BESS readyUSD 2,883
Year 1084.1%B — Second lifeUSD 2,496
Modelled state of health and residual value for the BYD Atto 3 pack.
LFP Prismatic

What the chemistry means here

01

How it ages

LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.

02

Thermal behaviour

LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.

Handling LFP Prismatic

Prismatic LFP cans are heavy and rigid: palletise them upright, restrain them against movement and keep terminals capped. Swelling is less common than in pouch cells but any bulged can goes straight to quarantine.
Passenger handling

Collecting a BYD Atto 3 pack

60.5 kWh, 1 modules, about 448 kg — this is how the Monterrey, Nuevo Leon team plans the job.

Removing a passenger EV battery pack for recycling
01

Removal

Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.

02

Packaging

One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.

03

Consolidation

Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.

Before the truck arrives

  • Pull the service disconnect and record pack voltage
  • Drain or cap coolant lines before lifting
  • Photograph the pack casing and any impact damage
  • Keep the VIN and pack serial together on the manifest

Monterrey, Nuevo Leon site notes

  • Cross-border shipments need permits in place well before collection.
  • Plants can set up recurring scrap pickups.
  • Declare chemistry and state of charge at booking.
  • Damaged units are held in isolated storage.
Recovery

What this pack yields

lithium

4.49 kg

nickel

0 kg

cobalt

0 kg

manganese

0 kg

copper

13.57 kg

aluminium

16.2 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in Mexico

General Law for the Prevention and Integral Management of Waste (LGPGIR)

Regulator: SEMARNAT

The yard operates under Mexican federal environmental rules administered by SEMARNAT, together with Nuevo León state requirements. Cross-border shipments need hazardous waste export authorisation and US import notification, and transport follows applicable dangerous-goods rules.

FAQ

BYD Atto 3 in Monterrey, Nuevo Leon: common questions

Can I drop off a BYD Atto 3 battery at Monterrey, Nuevo Leon?

Yes, by appointment. Monterrey — Nuevo Leon Logistics Yard accepts whole BYD Atto 3 packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.

What happens to BYD Atto 3 modules after Monterrey, Nuevo Leon?

Intake at Monterrey, Nuevo Leon, then Graded at Atlanta, Georgia, then Second life at Gothenburg, Sweden, then Refined at Reno, Nevada. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.

How should a BYD Atto 3 pack be prepared for pickup?

Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.

Which rules apply to BYD Atto 3 recycling in Mexico?

General Law for the Prevention and Integral Management of Waste (LGPGIR), overseen by SEMARNAT. Hazardous materials transport follows SCT regulations, with lithium-ion batteries classed as Class 9.

Coverage

Cities collected by Monterrey, Nuevo Leon

Retiring BYD Atto 3 packs near Monterrey, Nuevo Leon?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.