EVBatteryRecycling
Direct intake sitePassenger · NCA Pouch

Audi e-tron 55 quattro battery recycling in Melbourne, Victoria

Melbourne — Victoria Collection Yard takes whole Audi e-tron 55 quattro packs straight from fleets, dealers and workshops. Packs are weighed, de-energised and logged here before modules move on for grading or refining.

Pack value at 80% SOH

4,147 USD

Hybrid Split

Second-life share

47%

At 80% SOH

Site capacity

12,000 TPA

Reverse Logistics Yard

Cities served

2

From Melbourne, Victoria

Audi e-tron 55 quattro pack data
Route

Where a Audi e-tron 55 quattro pack goes from Melbourne, Victoria

  1. 1

    Intake at Melbourne, Victoria

    One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed. Each pack is weighed, photographed and discharged below 30% state of charge.

  2. 2

    Graded at Tuas, Singapore

    Modules travel 6,072 km to Singapore — Tuas Diagnostics Hub for capacity, resistance and impedance testing across all 36 modules.

  3. 3

    Second life at Gothenburg, Sweden

    At 80% SOH about 47% of the pack qualifies for reuse and goes to Gothenburg — Nordic Second-Life Campus (15,980 km). Selective — only low-swell pouch stacks above 82% SOH are cleared for repurposing.

  4. 4

    Refined at Ningde, Fujian

    Remaining modules are shredded to black mass and refined at Ningde — Fujian Refining Base, 7,644 km away.

StageFacilityDistance
Nearest grading benchSingapore — Tuas Diagnostics Hub6,072 km
Nearest second-life worksGothenburg — Nordic Second-Life Campus15,980 km
Nearest refineryNingde — Fujian Refining Base7,644 km
Straight-line distances from Melbourne, Victoria to the next facilities in the network.
The pack

Inside the Audi e-tron 55 quattro battery

The Audi e-tron 55 quattro (2019) carries a 95 kWh NCA Pouch pack with 36 modules at 396 V, weighing roughly 513 kg. Premium nickel-cobalt pouch stacks with the highest recovery credit and the strictest safety handling class.

Service yearSOHGradeValue
Year 294.9%A — BESS readyUSD 5,165
Year 490.6%A — BESS readyUSD 4,967
Year 686.3%A — BESS readyUSD 4,751
Year 882%B — Second lifeUSD 4,315
Year 1077.7%B — Second lifeUSD 3,982
Modelled state of health and residual value for the Audi e-tron 55 quattro pack.
NCA Pouch

What the chemistry means here

01

How it ages

NCA can deliver long life when it is kept in a moderate state-of-charge window, but it is sensitive to high voltage and heat. Swelling from gas generation is a common retirement signal in pouch formats.

02

Thermal behaviour

NCA shares the oxygen-release behaviour of high-nickel cathodes and is generally considered among the more reactive EV chemistries. Pouch cells have no rigid can, so mechanical damage and swelling translate quickly into safety risk.

Handling NCA Pouch

Treat every NCA pouch module as potentially damaged until inspected: individual containment for any swelled unit, non-conductive cushioning and no compression during transport.
Passenger handling

Collecting a Audi e-tron 55 quattro pack

95 kWh, 36 modules, about 513 kg — this is how the Melbourne, Victoria team plans the job.

Removing a passenger EV battery pack for recycling
01

Removal

Packs are dropped on a vehicle lift using the OEM procedure and a rated battery table, then isolated at the service disconnect.

02

Packaging

One pack per UN-rated pallet box, strapped and restrained, with terminals capped and coolant ports sealed.

03

Consolidation

Dealer and workshop returns are consolidated into full truckloads, typically eight or more packs per run.

Before the truck arrives

  • Pull the service disconnect and record pack voltage
  • Drain or cap coolant lines before lifting
  • Photograph the pack casing and any impact damage
  • Keep the VIN and pack serial together on the manifest

Melbourne, Victoria site notes

  • Declare chemistry and state of charge at booking.
  • Storage installers can book collections.
  • Damaged units require special handling.
  • Consolidated loads reduce transport cost.
Recovery

What this pack yields

lithium

5.06 kg

nickel

36.93 kg

cobalt

6.11 kg

manganese

0.6 kg

copper

19.21 kg

aluminium

12.21 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in Australia

Product Stewardship Act 2011 and state waste legislation

Regulator: DCCEEW (federal) and state EPAs

The yard operates under Victorian environmental rules administered by EPA Victoria and national battery stewardship arrangements. Transport follows the Australian Dangerous Goods Code.

FAQ

Audi e-tron 55 quattro in Melbourne, Victoria: common questions

Can I drop off a Audi e-tron 55 quattro battery at Melbourne, Victoria?

Yes, by appointment. Melbourne — Victoria Collection Yard accepts whole Audi e-tron 55 quattro packs; book a collection or a drop-off slot so the site can prepare packaging and paperwork.

What happens to Audi e-tron 55 quattro modules after Melbourne, Victoria?

Intake at Melbourne, Victoria, then Graded at Tuas, Singapore, then Second life at Gothenburg, Sweden, then Refined at Ningde, Fujian. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.

How should a Audi e-tron 55 quattro pack be prepared for pickup?

Pull the service disconnect and record pack voltage. Drain or cap coolant lines before lifting. Photograph the pack casing and any impact damage. Keep the VIN and pack serial together on the manifest.

Which rules apply to Audi e-tron 55 quattro recycling in Australia?

Product Stewardship Act 2011 and state waste legislation, overseen by DCCEEW (federal) and state EPAs. Road movements follow the Australian Dangerous Goods Code, with lithium-ion batteries shipped as Class 9 under UN 3480 or UN 3481.

Coverage

Cities collected by Melbourne, Victoria

Retiring Audi e-tron 55 quattro packs near Melbourne, Victoria?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.