EVBatteryRecycling
Second-life stageTwo-Wheeler · NMC 811 (2170)

Ather 450X Gen 3 battery recycling in Butibori, Maharashtra

Butibori, Maharashtra receives graded Ather 450X Gen 3 modules that passed as grade A or B and rebuilds them into warrantied stationary storage.

Pack value at 80% SOH

173 USD

Hybrid Split

Second-life share

47%

At 80% SOH

Site capacity

9,500 TPA

Second-Life BESS Works

Cities served

0

From Butibori, Maharashtra

Ather 450X Gen 3 pack data
Route

Where a Ather 450X Gen 3 pack goes from Butibori, Maharashtra

  1. 1

    Collected via Zaheerabad, Telangana

    Whole packs enter the network at Hyderabad — Zaheerabad Recovery Campus, 387 km away, where they are weighed and de-energised.

  2. 2

    Graded at Pithampur, Madhya Pradesh

    Modules travel 385 km to Indore — Pithampur Grading Plant for capacity, resistance and impedance testing across all 2 modules.

  3. 3

    Second-life build at Butibori, Maharashtra

    Grade A and B modules — about 47% of a pack at 80% SOH — are matched and rebuilt into storage systems on site.

  4. 4

    Refined at Atchutapuram, Andhra Pradesh

    Remaining modules are shredded to black mass and refined at Visakhapatnam — Atchutapuram Refinery, 558 km away.

StageFacilityDistance
Nearest intake yardHyderabad — Zaheerabad Recovery Campus387 km
Nearest grading benchIndore — Pithampur Grading Plant385 km
Nearest refineryVisakhapatnam — Atchutapuram Refinery558 km
Straight-line distances from Butibori, Maharashtra to the next facilities in the network.

Faster option

The closest direct intake sites for Ather 450X Gen 3 packs are Zaheerabad, Telangana (387 km) and Chakan, Maharashtra (583 km).
The pack

Inside the Ather 450X Gen 3 battery

The Ather 450X Gen 3 (2022) carries a 3.7 kWh NMC 811 Cylindrical 2170 pack with 2 modules at 52 V, weighing roughly 21 kg. High-nickel cylindrical cells with the strongest hydrometallurgical recovery credit per tonne of black mass.

Service yearSOHGradeValue
Year 295.3%A — BESS readyUSD 233
Year 491%A — BESS readyUSD 224
Year 686.7%A — BESS readyUSD 215
Year 882.4%B — Second lifeUSD 187
Year 1078.1%B — Second lifeUSD 164
Modelled state of health and residual value for the Ather 450X Gen 3 pack.
NMC 811 (2170)

What the chemistry means here

01

How it ages

NMC 811 loses capacity through a mix of SEI growth, cathode surface reconstruction and micro-cracking of nickel-rich particles. Resistance climbs faster than in LFP, which matters as much as capacity for second-life duty.

02

Thermal behaviour

High-nickel NMC cathodes release oxygen as they decompose, so once runaway starts it is fast and energetic. Cylindrical 2170 cells vent through a designed rupture point, which helps, but cell-to-cell propagation inside a tightly packed module is the main hazard.

Handling NMC 811 (2170)

Cylindrical modules are dense and often liquid-cooled: drain and cap coolant lines, check for coolant ingress, and keep modules below 30% state of charge for storage and transport.
Two-Wheeler handling

Collecting a Ather 450X Gen 3 pack

3.7 kWh, 2 modules, about 21 kg — this is how the Butibori, Maharashtra team plans the job.

Removing a two-wheeler EV battery pack for recycling
01

Removal

Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.

02

Packaging

Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.

03

Consolidation

Dealer and swap-station returns are aggregated at a single point so one collection clears many units.

Before the truck arrives

  • Tape terminals and connectors on every pack
  • Separate swollen or dropped packs into their own container
  • Record serials in a single list per cage
  • Store below 30% charge away from charging racks

Butibori, Maharashtra site notes

  • Whole packs are not accepted; modules must arrive already graded.
  • Each module needs its grade report and serial number.
  • Finished units are dispatched on scheduled delivery runs agreed with the buyer.
  • Buyers can inspect systems before dispatch by appointment.
Recovery

What this pack yields

lithium

0.21 kg

nickel

1.36 kg

cobalt

0.17 kg

manganese

0.16 kg

copper

0.67 kg

aluminium

0.57 kg

Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.

Compliance

Rules in India

Battery Waste Management Rules 2022 (BWMR)

Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards

The works operates under Maharashtra Pollution Control Board consent. Repurposed storage systems are built to applicable Indian electrical and safety requirements, and the provenance of every module is recorded so each system can be traced back to its source packs.

FAQ

Ather 450X Gen 3 in Butibori, Maharashtra: common questions

Can I drop off a Ather 450X Gen 3 battery at Butibori, Maharashtra?

Butibori, Maharashtra is a second-life bess works and does not accept whole packs from customers. Book a collection and the pack enters the network at Zaheerabad, Telangana, 387 km away.

What happens to Ather 450X Gen 3 modules after Butibori, Maharashtra?

Collected via Zaheerabad, Telangana, then Graded at Pithampur, Madhya Pradesh, then Second-life build at Butibori, Maharashtra, then Refined at Atchutapuram, Andhra Pradesh. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.

How should a Ather 450X Gen 3 pack be prepared for pickup?

Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.

Which rules apply to Ather 450X Gen 3 recycling in India?

Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.

Retiring Ather 450X Gen 3 packs near Butibori, Maharashtra?

Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.