Piaggio Ape E-City battery recycling in Tuas, Singapore
Tuas, Singapore is a diagnostics site: Piaggio Ape E-City packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
256 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
18,000 TPA
Cell Grading & Diagnostics
Cities served
1
From Tuas, Singapore
Where a Piaggio Ape E-City pack goes from Tuas, Singapore
- 1
Collected via Ulsan, South Korea
Whole packs enter the network at Ulsan — Korea Recovery Campus, 4,637 km away, where they are weighed and de-energised.
- 2
Module grading at Tuas, Singapore
All 4 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 56% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (9,976 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refined at Ningde, Fujian
Remaining modules are shredded to black mass and refined at Ningde — Fujian Refining Base, 3,291 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Ulsan — Korea Recovery Campus | 4,637 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 9,976 km |
| Nearest refinery | Ningde — Fujian Refining Base | 3,291 km |
Faster option
Inside the Piaggio Ape E-City battery
The Piaggio Ape E-City (2021) carries a 8 kWh LFP Prismatic (LiFePO4) pack with 4 modules at 60 V, weighing roughly 59 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.8% | A — BESS ready | USD 422 |
| Year 4 | 93.7% | A — BESS ready | USD 409 |
| Year 6 | 90.6% | A — BESS ready | USD 396 |
| Year 8 | 87.5% | A — BESS ready | USD 383 |
| Year 10 | 84.4% | B — Second life | USD 336 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Piaggio Ape E-City pack
8 kWh, 4 modules, about 59 kg — this is how the Tuas, Singapore team plans the job.
Removal
Packs are removed from the under-seat or rear bay; high-cycle fleet packs are checked for water ingress first.
Packaging
Packs are palletised in small groups inside UN-rated boxes, with dividers between units.
Consolidation
Fleet depots and dealer service points are scheduled as recurring milk runs rather than one-off pickups.
Before the truck arrives
- Check for corrosion and water ingress in the pack bay
- Flag any aftermarket or repaired packs on the manifest
- Tape terminals and remove quick-connect plugs
- Group packs by chemistry before collection
Tuas, Singapore site notes
- Regional shipments require import permits.
- Provide serial lists.
- Damaged packs need declaration.
- Fleet pickups can be arranged.
What this pack yields
lithium
0.59 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
1.79 kg
aluminium
2.14 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Singapore
Resource Sustainability Act 2019 and the Environmental Protection and Management Act
Regulator: National Environment Agency (NEA)
The hub operates under Singapore National Environment Agency requirements, including its producer responsibility scheme for e-waste. International shipments follow Basel Convention procedures where applicable.
Piaggio Ape E-City in Tuas, Singapore: common questions
Can I drop off a Piaggio Ape E-City battery at Tuas, Singapore?
Tuas, Singapore is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Ulsan, South Korea, 4,637 km away.
What happens to Piaggio Ape E-City modules after Tuas, Singapore?
Collected via Ulsan, South Korea, then Module grading at Tuas, Singapore, then Second life at Zwickau, Saxony, then Refined at Ningde, Fujian. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Piaggio Ape E-City pack be prepared for pickup?
Check for corrosion and water ingress in the pack bay. Flag any aftermarket or repaired packs on the manifest. Tape terminals and remove quick-connect plugs. Group packs by chemistry before collection.
Which rules apply to Piaggio Ape E-City recycling in Singapore?
Resource Sustainability Act 2019 and the Environmental Protection and Management Act, overseen by National Environment Agency (NEA). Dangerous goods movements follow SCDF and MPA requirements, with frequent sea transhipment under the IMDG Code.
Cities collected by Tuas, Singapore
Piaggio Ape E-City at other sites
Other three-wheeler packs at Tuas, Singapore
Retiring Piaggio Ape E-City packs near Tuas, Singapore?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.