Ola Electric S1 X+ battery recycling in Atchutapuram, Andhra Pradesh
Atchutapuram, Andhra Pradesh does not take whole packs. It receives black mass made from Ola Electric S1 X+ modules that failed grading, and turns it into battery-grade salts.
Pack value at 80% SOH
112 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
13,000 TPA
Hydrometallurgical Refinery
Cities served
0
From Atchutapuram, Andhra Pradesh
Where a Ola Electric S1 X+ pack goes from Atchutapuram, Andhra Pradesh
- 1
Collected via Khordha, Odisha
Whole packs enter the network at Bhubaneswar — Khordha Collection Yard, 411 km away, where they are weighed and de-energised.
- 2
Graded at Hosur, Tamil Nadu
Modules travel 761 km to Bengaluru — Hosur Diagnostics Centre for capacity, resistance and impedance testing across all 2 modules.
- 3
Second life at Butibori, Maharashtra
At 80% SOH about 56% of the pack qualifies for reuse and goes to Nagpur — Butibori Second-Life Works (558 km). Excellent — long calendar life makes LFP the preferred feedstock for stationary BESS repurposing.
- 4
Refining at Atchutapuram, Andhra Pradesh
Black mass from failed modules is leached and refined here into battery-grade lithium salts.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Bhubaneswar — Khordha Collection Yard | 411 km |
| Nearest grading bench | Bengaluru — Hosur Diagnostics Centre | 761 km |
| Nearest second-life works | Nagpur — Butibori Second-Life Works | 558 km |
Faster option
Inside the Ola Electric S1 X+ battery
The Ola Electric S1 X+ (2024) carries a 3.5 kWh LFP Prismatic (LiFePO4) pack with 2 modules at 48 V, weighing roughly 26 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.3% | A — BESS ready | USD 184 |
| Year 4 | 93.2% | A — BESS ready | USD 178 |
| Year 6 | 90.1% | A — BESS ready | USD 172 |
| Year 8 | 87% | A — BESS ready | USD 166 |
| Year 10 | 83.9% | B — Second life | USD 143 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Ola Electric S1 X+ pack
3.5 kWh, 2 modules, about 26 kg — this is how the Atchutapuram, Andhra Pradesh team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Atchutapuram, Andhra Pradesh site notes
- Only black mass and cathode scrap are accepted at this site.
- Bulk bags must be sealed, labelled and accompanied by declared chemistry.
- Port-linked consignments need documentation before arrival.
- Sampling at intake determines settlement; results are shared with the consignor.
What this pack yields
lithium
0.26 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
0.79 kg
aluminium
0.94 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in India
Battery Waste Management Rules 2022 (BWMR)
Regulator: Central Pollution Control Board (CPCB) and State Pollution Control Boards
The refinery operates under Andhra Pradesh Pollution Control Board consent, with conditions covering effluent treatment, air emissions and hazardous chemical storage. As a registered recycler it generates recovery evidence for producers under the Battery Waste Management Rules 2022, and port-linked movements follow customs and applicable waste-shipment controls.
Ola Electric S1 X+ in Atchutapuram, Andhra Pradesh: common questions
Can I drop off a Ola Electric S1 X+ battery at Atchutapuram, Andhra Pradesh?
Atchutapuram, Andhra Pradesh is a hydrometallurgical refinery and does not accept whole packs from customers. Book a collection and the pack enters the network at Khordha, Odisha, 411 km away.
What happens to Ola Electric S1 X+ modules after Atchutapuram, Andhra Pradesh?
Collected via Khordha, Odisha, then Graded at Hosur, Tamil Nadu, then Second life at Butibori, Maharashtra, then Refining at Atchutapuram, Andhra Pradesh. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Ola Electric S1 X+ pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ola Electric S1 X+ recycling in India?
Battery Waste Management Rules 2022 (BWMR), overseen by Central Pollution Control Board (CPCB) and State Pollution Control Boards. Retired packs move as hazardous goods by road under central motor vehicle rules, and export needs Basel-compliant permissions.
Ola Electric S1 X+ at other sites
Other two-wheeler packs at Atchutapuram, Andhra Pradesh
Retiring Ola Electric S1 X+ packs near Atchutapuram, Andhra Pradesh?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.