Ather Rizta Z battery recycling in Zwickau, Saxony
Zwickau, Saxony receives graded Ather Rizta Z modules that passed as grade A or B and rebuilds them into warrantied stationary storage.
Pack value at 80% SOH
118 USD
Hybrid Split
Second-life share
56%
At 80% SOH
Site capacity
20,000 TPA
Second-Life BESS Works
Cities served
0
From Zwickau, Saxony
Where a Ather Rizta Z pack goes from Zwickau, Saxony
- 1
Collected via Dubai, UAE
Whole packs enter the network at Dubai — Jebel Ali Logistics Yard, 4,604 km away, where they are weighed and de-energised.
- 2
Graded at Stuttgart, Germany
Modules travel 321 km to Stuttgart — Baden-Wurttemberg Grading Works for capacity, resistance and impedance testing across all 2 modules.
- 3
Second-life build at Zwickau, Saxony
Grade A and B modules — about 56% of a pack at 80% SOH — are matched and rebuilt into storage systems on site.
- 4
Refined at Rotterdam, South Holland
Remaining modules are shredded to black mass and refined at Rotterdam — Maasvlakte Refining Works, 572 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Dubai — Jebel Ali Logistics Yard | 4,604 km |
| Nearest grading bench | Stuttgart — Baden-Wurttemberg Grading Works | 321 km |
| Nearest refinery | Rotterdam — Maasvlakte Refining Works | 572 km |
Faster option
Inside the Ather Rizta Z battery
The Ather Rizta Z (2024) carries a 3.7 kWh LFP Prismatic (LiFePO4) pack with 2 modules at 52 V, weighing roughly 27 kg. Cobalt-free prismatic chemistry dominant in Indian passenger EVs and commercial fleets. Low black mass value, exceptional second-life economics.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 96.4% | A — BESS ready | USD 194 |
| Year 4 | 93.3% | A — BESS ready | USD 188 |
| Year 6 | 90.2% | A — BESS ready | USD 182 |
| Year 8 | 87.1% | A — BESS ready | USD 176 |
| Year 10 | 84% | B — Second life | USD 152 |
What the chemistry means here
How it ages
LFP fades slowly and fairly linearly for most of its life. Capacity loss is driven mainly by lithium inventory being locked up in the SEI layer on the graphite anode, while the cathode structure stays largely intact.
Thermal behaviour
LFP's olivine cathode holds its oxygen tightly, so thermal runaway typically starts at higher temperatures than nickel-rich cells and releases noticeably less heat. It is not inert: a failing LFP cell still vents flammable electrolyte vapour and hydrogen, and large prismatic cans store a lot of energy in one place.
Handling LFP Prismatic
Collecting a Ather Rizta Z pack
3.7 kWh, 2 modules, about 27 kg — this is how the Zwickau, Saxony team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Zwickau, Saxony site notes
- Only graded modules are accepted.
- Modules need grade reports and traceable serial numbers.
- Finished systems are delivered on scheduled runs.
- Buyers can arrange site visits before purchase.
What this pack yields
lithium
0.27 kg
nickel
0 kg
cobalt
0 kg
manganese
0 kg
copper
0.83 kg
aluminium
0.99 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in Germany
EU Battery Regulation (EU) 2023/1542 and national implementing law
Regulator: Umweltbundesamt (UBA) with registration through stiftung ear
Operations are subject to German permitting, including the Federal Immission Control Act where applicable, and to the EU Battery Regulation (EU) 2023/1542, which covers repurposed batteries and producer responsibility. Systems are built to applicable European safety standards.
Ather Rizta Z in Zwickau, Saxony: common questions
Can I drop off a Ather Rizta Z battery at Zwickau, Saxony?
Zwickau, Saxony is a second-life bess works and does not accept whole packs from customers. Book a collection and the pack enters the network at Dubai, UAE, 4,604 km away.
What happens to Ather Rizta Z modules after Zwickau, Saxony?
Collected via Dubai, UAE, then Graded at Stuttgart, Germany, then Second-life build at Zwickau, Saxony, then Refined at Rotterdam, South Holland. At 80% SOH roughly 56% of the pack goes to second life and the rest is refined.
How should a Ather Rizta Z pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ather Rizta Z recycling in Germany?
EU Battery Regulation (EU) 2023/1542 and national implementing law, overseen by Umweltbundesamt (UBA) with registration through stiftung ear. Road transport follows ADR, and shipments out of Germany fall under the EU Waste Shipment Regulation.
Ather Rizta Z at other sites
Other two-wheeler packs at Zwickau, Saxony
Retiring Ather Rizta Z packs near Zwickau, Saxony?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.