Ather 450X Gen 3 battery recycling in Birmingham, England
Birmingham, England is a diagnostics site: Ather 450X Gen 3 packs arrive here from intake yards for module-level capacity, resistance and impedance testing, which decides reuse or refining.
Pack value at 80% SOH
173 USD
Hybrid Split
Second-life share
47%
At 80% SOH
Site capacity
16,000 TPA
Cell Grading & Diagnostics
Cities served
3
From Birmingham, England
Where a Ather 450X Gen 3 pack goes from Birmingham, England
- 1
Collected via Toronto, Ontario
Whole packs enter the network at Toronto — Ontario Recovery Campus, 5,558 km away, where they are weighed and de-energised.
- 2
Module grading at Birmingham, England
All 2 modules are tested for capacity, DC resistance and impedance, then assigned grade A to D.
- 3
Second life at Zwickau, Saxony
At 80% SOH about 47% of the pack qualifies for reuse and goes to Zwickau — Saxony Second-Life Works (1,011 km). Good — grade-A modules above 80% SOH qualify for commercial-scale BESS strings.
- 4
Refined at Rotterdam, South Holland
Remaining modules are shredded to black mass and refined at Rotterdam — Maasvlakte Refining Works, 439 km away.
| Stage | Facility | Distance |
|---|---|---|
| Nearest intake yard | Toronto — Ontario Recovery Campus | 5,558 km |
| Nearest second-life works | Zwickau — Saxony Second-Life Works | 1,011 km |
| Nearest refinery | Rotterdam — Maasvlakte Refining Works | 439 km |
Faster option
Inside the Ather 450X Gen 3 battery
The Ather 450X Gen 3 (2022) carries a 3.7 kWh NMC 811 Cylindrical 2170 pack with 2 modules at 52 V, weighing roughly 21 kg. High-nickel cylindrical cells with the strongest hydrometallurgical recovery credit per tonne of black mass.
| Service year | SOH | Grade | Value |
|---|---|---|---|
| Year 2 | 95.3% | A — BESS ready | USD 233 |
| Year 4 | 91% | A — BESS ready | USD 224 |
| Year 6 | 86.7% | A — BESS ready | USD 215 |
| Year 8 | 82.4% | B — Second life | USD 187 |
| Year 10 | 78.1% | B — Second life | USD 164 |
What the chemistry means here
How it ages
NMC 811 loses capacity through a mix of SEI growth, cathode surface reconstruction and micro-cracking of nickel-rich particles. Resistance climbs faster than in LFP, which matters as much as capacity for second-life duty.
Thermal behaviour
High-nickel NMC cathodes release oxygen as they decompose, so once runaway starts it is fast and energetic. Cylindrical 2170 cells vent through a designed rupture point, which helps, but cell-to-cell propagation inside a tightly packed module is the main hazard.
Handling NMC 811 (2170)
Collecting a Ather 450X Gen 3 pack
3.7 kWh, 2 modules, about 21 kg — this is how the Birmingham, England team plans the job.
Removal
Removable packs are unclipped by hand; fixed packs are removed at the dealer bench with the frame supported.
Packaging
Packs travel in UN-approved steel or plastic cages with non-conductive dividers, typically dozens per cage.
Consolidation
Dealer and swap-station returns are aggregated at a single point so one collection clears many units.
Before the truck arrives
- Tape terminals and connectors on every pack
- Separate swollen or dropped packs into their own container
- Record serials in a single list per cage
- Store below 30% charge away from charging racks
Birmingham, England site notes
- Dismantlers should secure packs before collection.
- Fleet operators can book depot pickups.
- Development packs require architecture details.
- Damaged packs need prior declaration.
What this pack yields
lithium
0.21 kg
nickel
1.36 kg
cobalt
0.17 kg
manganese
0.16 kg
copper
0.67 kg
aluminium
0.57 kg
Refining-route estimate at 80% SOH. Measured module health on the bench sets the final split.
Rules in United Kingdom
Waste Batteries and Accumulators Regulations 2009
Regulator: Environment Agency and devolved regulators, with OPSS on market placement
The works operates under Environment Agency permitting in England and the UK waste batteries regulations, which place producer responsibility obligations on those placing batteries on the market. Transport follows UK dangerous goods rules based on ADR.
Ather 450X Gen 3 in Birmingham, England: common questions
Can I drop off a Ather 450X Gen 3 battery at Birmingham, England?
Birmingham, England is a cell grading & diagnostics and does not accept whole packs from customers. Book a collection and the pack enters the network at Toronto, Ontario, 5,558 km away.
What happens to Ather 450X Gen 3 modules after Birmingham, England?
Collected via Toronto, Ontario, then Module grading at Birmingham, England, then Second life at Zwickau, Saxony, then Refined at Rotterdam, South Holland. At 80% SOH roughly 47% of the pack goes to second life and the rest is refined.
How should a Ather 450X Gen 3 pack be prepared for pickup?
Tape terminals and connectors on every pack. Separate swollen or dropped packs into their own container. Record serials in a single list per cage. Store below 30% charge away from charging racks.
Which rules apply to Ather 450X Gen 3 recycling in United Kingdom?
Waste Batteries and Accumulators Regulations 2009, overseen by Environment Agency and devolved regulators, with OPSS on market placement. Road transport follows ADR through the Carriage of Dangerous Goods Regulations, and exports need waste shipment approval.
Cities collected by Birmingham, England
Ather 450X Gen 3 at other sites
Other two-wheeler packs at Birmingham, England
Retiring Ather 450X Gen 3 packs near Birmingham, England?
Share pack counts and condition. The despatch desk confirms a collection window within one working day and sends the right packaging.